« previous next »
Pages: [1]   Go Down

Author Topic: Weaver Rings? Proper height the first time?  (Read 564 times)

0 Members and 2 Guests are viewing this topic.

Offline Robert

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1618
Weaver Rings? Proper height the first time?
« on: June 28, 2005, 05:22:44 AM »
My new barrel will arrive this week.  I typically use Weaver rings and bases.  I alrerady have the base ready,  but ...Do I need 'high' rings or will the medium be enough for the hammer to clear the scope?  I will probably be using a typical size 3-9x 30....no over-size stuff.
Logged
....make it count

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Weaver Rings? Proper height the first time
« Reply #1 on: June 28, 2005, 05:27:23 AM »
For that small of objective...medium should work just fine...

Mac
Logged
You can cry me a river... but...build me a bridge and then get over it...

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Weaver Rings? Proper height the first time
« Reply #2 on: June 28, 2005, 06:17:29 AM »
Robert, as Mac said, it will probably work, just depends on the position of the scope and the size of the ocular bell/power ring. I use medium sig zees 99% of the time, but some scopes require the high sig zees. I can usually get away with placing the power ring just behind the hammer so it gives me just a little clearance in just the right spot, but that is a configuration that fits me well and may not for everyone for proper eye relief.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Robert

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1618
Weaver Rings? Proper height the first time
« Reply #3 on: June 28, 2005, 01:20:55 PM »
Thanks Guys.  We still have to see what We get back from NEF. The guy that had the receiver before me trimmed the end off of the hammer. (duh)  We wrote to NEF that they could restore it if it was easy, but they haven't said if they fixed it or not.
Logged
....make it count

Offline kufford

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
Weaver Rings? Proper height the first time
« Reply #4 on: June 30, 2005, 08:59:59 AM »
Isn't the standard 3-9 scope a 40mil objective?
Logged

Offline Robert

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1618
Weaver Rings? Proper height the first time
« Reply #5 on: June 30, 2005, 10:32:16 AM »
Ooops, yes it is.  Sorry for the typo.
Logged
....make it count

Offline lonewolf5347

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 219
weaver rings
« Reply #6 on: June 30, 2005, 12:39:44 PM »
Size of the ocular bell/power ring :
I have a 32 mm scope (bushnell) which I try to mount with medium weaver rings on the Handi @ ran into the problem above like Quick: stated.
I went with the high rings from weaver and a old tasco I had sitting around for the last 25 years .work out well.The busnell still gave me pronlems :-D
Logged

Offline lostsniper308

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 790
  • Gender: Male
  • old beaten up Martini-Henry .303 we found.
    • My Facebook account
Weaver Rings? Proper height the first time
« Reply #7 on: June 30, 2005, 05:06:03 PM »
i got Medium on a 3-9x40 and theres about 1/2mm of clearence between hammer and scope.
Logged
B Co. 1-22Inf 1st BCT 4th Infantry Division
OIF 08-09 out of the army now

Offline poncaguy

  • GBO Supporter
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2751
  • Gender: Male
Weaver Rings? Proper height the first time
« Reply #8 on: July 01, 2005, 04:19:23 AM »
I have been having to use high Leupold vertical split rings to clear my scopes  because of the size of the ocular and adjustment rings...........
Logged
Pages: [1]   Go Up
« previous next »