Author Topic: Best 22 Rifle Scope Rings??? (Read 2422 times)

Dave1 · « **on:** May 17, 2005, 01:36:34 AM »

I just recently picked up a nice Browning BPR 22 mag rifle and want to mount a good 1" 4x or 6x scope on it. The rifle has the typical groved reciever.

What is the best brand/type of 22 rifle scope rings that will work on this gun?

I have had some alum 22 rifle rings in the past that broke so I assuming that a set of steel rings may be the best.

Thanks for any feedback.

Dave
davisalf@aol.com

Lawdog · « **Reply #1 on:** May 17, 2005, 09:38:18 AM »

I like the Burris rings. Use them on most all of my rifles. Lawdog

Shsrcat · « **Reply #2 on:** June 08, 2005, 04:45:19 PM »

I second the Burris rings. I use Signature Zee rings with guns having a Weaver type base and Signature rings when using the Burris bases. I like having the inserts as they seem to make up for any alignment issues.

Keith L · « **Reply #3 on:** June 09, 2005, 12:17:42 AM »

I like the Burres rings as well. I don't know if they make the signature series for .22 mounts, but the standard .22 rings they make are the best holding and most consistent I have found.

Dave1 · « **Reply #4 on:** June 09, 2005, 01:20:22 AM »

Thanks for the info. I'll have some on the way shortly.

Dave

DWARREN123 · « **Reply #5 on:** June 20, 2005, 04:59:02 AM »

Brands I have and like are Lynx and Redfield

jeff · « **Reply #6 on:** June 28, 2005, 11:19:51 AM »

I need to chime in too.

My first choice is Burris Signature Zee rings. However, last night I made an exception because I had no other choice.

Ordered a set of B-Square 1" Air Sport Rings and hope they work on my Kimber 82 Government from CMP. I have been using a BKL mount and it worled fine, I just want the scope mounted lower. The B-Square rings will handle the slightly differen receiver grooves which are 9.5mm in width.

Not all grooves are equal!

rimfirehunter · « **Reply #7 on:** July 01, 2005, 05:10:19 PM »

For steel frame 3/8" groove rails I use nothing but Millet Steel Rings. Never one had a Millet Steel Ring set slip in the grooves.

rimfirehunter

moontroll · « **Reply #8 on:** July 02, 2005, 09:43:35 AM »

I have MIllet and Burris,I like the millet angel locks the best.

TScottO · « **Reply #9 on:** July 02, 2005, 02:53:04 PM »

I vote for the Millet as well.

Take Care,
Soctt

ironglow · « **Reply #10 on:** July 04, 2005, 04:35:02 PM »

...My choice ... Millets...they have the angle-lock feature allowing extra lateral adjustment....and they work well in metric grooves..CZs, air rifles etc.