Author Topic: 209x45 encore  (Read 1100 times)

0 Members and 1 Guest are viewing this topic.

Offline rickyp

  • Trade Count: (19)
  • Senior Member
  • *****
  • Posts: 3052
  • Gender: Male
209x45 encore
« on: May 25, 2005, 02:22:29 PM »
has anyone used the 26" 209x45 barrel to take a (some) deer or other big game?


How did it preform?

I have powerbelts in 195 Grain, AeroTip & 225 Grain, Hollow Point
I also have T/C 155 gr xtp

I have yet to shoot this barrel, I think I will be starting out with 100 gr of goex black powder or maybe 100 gr of pyrodex RS

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
209x45 encore
« Reply #1 on: May 25, 2005, 04:29:28 PM »
I got one for my son. He is shooting the 195 gr. Barnes Expanders over 100 gr. of triple7 and a 25ACP priming system. It shoots 1 1/2 in groups at 100 yards with this load. My son took two deer last season with it and the set up. Both one shot kills.  :D  I could not get any of the powerbelts to shoot well out of it.
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline rickyp

  • Trade Count: (19)
  • Senior Member
  • *****
  • Posts: 3052
  • Gender: Male
209x45 encore
« Reply #2 on: May 25, 2005, 04:32:19 PM »
I didnt know barns had bullets for the 45, I will have to check them out

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
209x45 encore
« Reply #3 on: May 26, 2005, 01:00:36 AM »
Quote from: rickyp
I didnt know barns had bullets for the 45, I will have to check them out


Check out Natchez Shooters Supplies for them.                                                                                                                                                     http://www.natchezss.com/category.cfm?contentID=productList&category=6&brand=BX&mfgGroup=34&subgroup=5037&CFID=98269&CFTOKEN=34838812
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline musicman

  • Trade Count: (0)
  • Member
  • *
  • Posts: 10
209x45 encore
« Reply #4 on: June 06, 2005, 11:44:37 AM »
I have had two 45's from t/c and niether one of them were worth a da&&. Wouldn't shoot a group for anything. STAY AWAY FROM THEM AND DON'T WAIST YOUR HARD EARNED MONEY

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
209x45 encore
« Reply #5 on: June 06, 2005, 02:04:22 PM »
Quote from: musicman
I have had two 45's from t/c and niether one of them were worth a da&&. Wouldn't shoot a group for anything. STAY AWAY FROM THEM AND DON'T WAIST YOUR HARD EARNED MONEY


I know several people that have them besides me, and they all like the ones they have. Not one problem with  4 other 45 cal owners.
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline musicman

  • Trade Count: (0)
  • Member
  • *
  • Posts: 10
209x45 encore
« Reply #6 on: June 13, 2005, 08:08:32 AM »
Well I guess that depends on what you want. If hitting somewhere on a eight inch paper plate maybe @ 100 yds is exceptable then I guess you wont have anything to worry about.

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
209x45 encore
« Reply #7 on: June 13, 2005, 05:20:49 PM »
Quote from: musicman
Well I guess that depends on what you want. If hitting somewhere on a eight inch paper plate maybe @ 100 yds is exceptable then I guess you wont have anything to worry about.


Well my 45 Cal Encore M/L shoots 1 1/2 inch groups at 100 yards.  Sure beats your 8 inch paper plate.  Just because you personally have a problem with your particular 45 Cal M/L, does not make all of them bad.  :roll:
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline Tom Brush

  • Trade Count: (4)
  • Member
  • *
  • Posts: 54
209x45 encore
« Reply #8 on: July 19, 2005, 06:54:08 AM »
My 45 had the 1-20 twist.  It shot 6" groups.  I returned it to T/C for evaluation.  They returned it with a note that I should use their 180 gr. bullet and 3-pellets for 1 1/2" accuracy.  I tried the load but the groups were no better.  I sent it back again and asked for a replacement barrel.  They sent another 1-20 twist with a note to shoot their 155 gr. bullet with 2 pellets for 1" accuracy.  I tried the new barrel and load and got between 4" and 6" groups.  Again I sent it back and asked for a 1-28 barrel.  I got the same 1-20 back again.  

I called T/C and explained that I wanted a 1-28 barrel and really did not want to waste money trying the old barrel again.  I was given a name to send the barrel to at the repair shop.  Soon I had my 1-28 barrel.  I shot it and it grouped 2 1/2".  Not the 1" they advertise.  I put it into the gun rack and forgot about it.  Months passed and I read an article about lapping the barrel with JB paste on a patched brush.  Being an old benchrest shooter it didn't sound right but I tried it.  The article said to use 100 strokes changing the patch every 15 passes.  I lapped it 45 passes.  I shot three groups with 100 gr. T7 2F and the 200 gr. Hornady bullet.  All were in 1".  

Encouraged I bought a .280 Remington and a .204 barrel.  Both group under 1/2" at 100 yds.

Tom

Offline oldmanTN

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
209x45 encore
« Reply #9 on: July 21, 2005, 08:15:07 AM »
Tom they did me the same way with my 45. I finally told them that I just wanted a 50 cal. and they sent me one. I also had a 300 win mag that did the same way.

Offline pebco

  • Trade Count: (0)
  • Member
  • *
  • Posts: 13
209x45 encore
« Reply #10 on: July 21, 2005, 10:15:57 AM »
I have a 45 cal encore with the 1-20 barrel, I also sent it back to TC with letter stating I wanted the 1-28 barrel and what kind of problems I was having, they sent my same barrel back and said it would shoot 1-1/2" groups at 100yds with 100gr pyrodex and ?TC bullets, I have not tried it and I called them back and complained about there poor work, the 1-20 barrel will shoot some nice groups but they are very picky, my gun had to have a oversize hinge pin before I could get any groups at all, this is very important but TC will tell you that it does not make any difference, sorry for long message.
A bad day hunting is better than a good day at work anytime!!!!

Offline John K

  • Trade Count: (0)
  • Member
  • *
  • Posts: 5
209x45 encore
« Reply #11 on: July 23, 2005, 01:29:26 AM »
I am just starting out with a T/C Encore .45 also.  Have found that mine dose not like light bullets, it dose like 200 gr sabots though.  With 145gr of pyrodex and 200 gr T/C Shockwaves it produces a single hole at 25 yards.  The only problem is how difficult it is to load, Shockwaves fit very tight in the bore.   Haven't bothered going out further yet as I am experimenting with diffrent powders/projectiles still.

John K