Author Topic: My troublesome 209X50 (Read 638 times)

dbl bbl · « **on:** October 21, 2005, 04:50:22 PM »

I've tried nearly every load combo possible for my encore 209X50, pyrodex powder, pellets, 777, powerbelts, sabots, conicals, etc. So far the best results I've got are 3"/50yds, most are much larger.

The rifle is scoped wth a proven 4X Leupold in Weavers and mounts are not loose. Trigger is set to about 2# and the pin is tight (will shoot 0.5" groups with centerfire bbls). Some of my buddies say its time to send to T/C for a replacement bbl, what do ya'll think?

sab-

Redhawk1 · « **Reply #1 on:** October 22, 2005, 01:45:09 AM »

Well if you tried all that, send it back. Give them detailed information on all the loads and powerbelts, sabots, conicals, etc.

Encore28 · « **Reply #2 on:** October 22, 2005, 03:27:35 AM »

I bet Mike in Oregon would be able to help you!!!!!!!!!!!!!!!!!
Encore28

TCAS · « **Reply #3 on:** October 23, 2005, 02:31:23 AM »

if it is a factory barrel send it back or have a gunsmith cut off the QLA and recrown. Mine will shoot around 3" at the 200meter range so you definately have a problem with the barrel.

TCAS

dbl bbl · « **Reply #4 on:** October 23, 2005, 04:02:50 AM »

Thanks for the replies, I'll send it back and see what happens.

sab-