« previous next »
Pages: [1]   Go Down

Author Topic: Limbsaver Pad  (Read 608 times)

0 Members and 2 Guests are viewing this topic.

Offline snicker

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 123
Limbsaver Pad
« on: September 11, 2005, 06:49:26 AM »
I noticed that Limbsaver makes a pad to fit the H&R Ultra Slug 12 ga, the SB2-988 model.   Are the stocks for the Ultra Slug and the Handi Rifle that much different that this wouldn't fit the Handi Rifle?  Just curious about that.  Thanks for any info.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Limbsaver Pad
« Reply #1 on: September 11, 2005, 08:33:25 AM »
Yup!! Go to the Limbsaver web site and download their templates, it doesn't match any of the stocks I have and I have a bunch. Some of them are close to the right size, but not close enough and the hole position and spacing is wrong. The best choice that I've tried is the small grind-to-fit, it takes very little grinding to get it to fit, I don't even take any off the pad itself, just the base plate.

http://limbsaver.com/limbsaver/firearms/firearms.aspx

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline snicker

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 123
Limbsaver Pad
« Reply #2 on: September 11, 2005, 10:13:44 AM »
Thanks for the info Quick.  I had thought maybe it wouldn't work but I guess I needed confirmation on that.  Guess I'll wait until Limbsaver decides to make one for the Handi.  (Probably be a long wait).  I tried the small slip on pad but couldn't get it tight enough to be comfortable and don't have the correct tools to grind a pad for it.  Oh well!
Logged

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Limbsaver Pad
« Reply #3 on: September 11, 2005, 12:42:06 PM »
Snicker,
 As Quickdtoo says, it really is a easy thing to fit this pad. Do you have a electrc drill? Now get a sanding disc and some sand paper to fit and you can do it!!!

OR, stop in at your local gun shop and see if they offer the service.

GoodLuck,
 CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline snicker

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 123
Limbsaver Pad
« Reply #4 on: September 11, 2005, 04:31:19 PM »
Thanks CW, didn't think of using the electric drill.  I'll have to give that a try and see how it works out.  Thanks again.
Logged

Offline PEPAW

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 400
Limbsaver Pad
« Reply #5 on: September 12, 2005, 07:35:04 AM »
I just fitted a pad to mine.   Grinding down the "terminator" pad I had on hand was easy on a grinding wheel.      Wish I had removed about 1/2 inch more off the wood before I started, however.    With a heavy coat, I will be leaning forward to reach a full view in the scope.

Is there a tape that fits over the intersection of the plastic base and the wood?   There isn't a real reason, more just for decor.
Anyone else remember this on perhaps older guns?


pepaw
Logged
Pages: [1]   Go Up
« previous next »