« previous next »
Pages: [1]   Go Down

Author Topic: "Dummy" screws on top of receiver - necessary?  (Read 925 times)

0 Members and 1 Guest are viewing this topic.

Offline lance1586

  • Trade Count: (0)
  • Member
  • *
  • Posts: 10
"Dummy" screws on top of receiver - necessary?
« on: April 27, 2006, 02:09:57 PM »
I recently bought a Marlin 336 in .35 Rem that came with a scope mounted.  I am going to shoot silhouette matches with this rifle.  I have a match coming up and forgot to order the replacement screws from Numrich.  Does anyone know if it is safe to shoot the rifle without the screws installed? Or could I install the ones that are currently holding the scope base but they, of corse, stick up quite a ways without the base installed.   I can't leave the base on because it blocks the rear sight?
     
     Anyone able to enlighten me on this?  Thanks in advance, Lance
Logged

Offline EsoxLucius

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 601
  • Gender: Male
"Dummy" screws on top of receiver
« Reply #1 on: April 27, 2006, 03:48:30 PM »
Go ahead and shoot it without them.  They just keep crap from getting into the action and make it look good.  You can always get 'em and put 'em in later.
Logged
We learn something new everyday whether we want to or not.

Offline ScoutMan

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 287
"Dummy" screws on top of receiver
« Reply #2 on: April 28, 2006, 07:08:36 AM »
Fill them in with gun grease. Use as a permanent solution or until you get the "dummy" screws.


SM
Logged
If you can get closer, get closer
If you can get steadier, get steadier.

A telescope helps you see; it does not help you hold and squeeze.-Jeff Cooper

Offline lance1586

  • Trade Count: (0)
  • Member
  • *
  • Posts: 10
dummy screws
« Reply #3 on: April 29, 2006, 06:21:08 PM »
Thanks fellas, I shot it today and didn't have any problems its just one of those things that doesn't hurt to ask.  Sure liked that Wild west trigger and the Marbles tang sight that I hung on her!
Logged

Offline oso45-70

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1918
  • Gender: Male
Re: "Dummy" screws on top of receiver - necessary?
« Reply #4 on: April 30, 2006, 05:56:18 AM »
Quote from: lance1586
I recently bought a Marlin 336 in .35 Rem that came with a scope mounted.  I am going to shoot silhouette matches with this rifle.  I have a match coming up and forgot to order the replacement screws from Numrich.  Does anyone know if it is safe to shoot the rifle without the screws installed? Or could I install the ones that are currently holding the scope base but they, of corse, stick up quite a ways without the base installed.   I can't leave the base on because it blocks the rear sight?
     
     Anyone able to enlighten me on this?  Thanks in advance, Lanc


Lance1586   A piece of electricians tape will work great  :D ...........Joe..........
Logged
LIFE NRA BENEFACTOR
LEAA LIFE MEMBER
GOA MEMBER
CCKBA MEMBER
AF & AM
NAHC LIFE
NMSSA MEMBER
ATA MEMBER

Profanity is the crutch of a crippled brain
Pages: [1]   Go Up
« previous next »