Author Topic: Deleted (Read 687 times)

jhmartin · « **Reply #1 on:** October 03, 2005, 12:46:59 PM »

I don't usually bump into this until about 35 yards, but we shoot .177 guns.

I've placed a shim in the rcope ring made from milk jug material. One problem is that it will compress somewhat for the first week it's in there. then it stabilizes.

IntrepidWizard · « **Reply #2 on:** October 03, 2005, 12:50:26 PM »

Gum wrappers work

dave · « **Reply #3 on:** October 03, 2005, 01:54:55 PM »

The best solution for this problem (its called barrel droop- the barrel is angled slightly downward from the line of the receiver, almost every spring gun made has some degree of it) is adjustable scope rings. However, a good set costs about $60. Bending the barrel upwards slightly is also a viable solution.

ABaker · « **Reply #4 on:** October 03, 2005, 07:10:27 PM »

Buy yourself an RWS C-Mount. Worth every penny, and Tough. I had the exact same problem on my RWS Diana. I couldn't seem to get the pellet high enough, even at 20 feet. This thing did the job. It should cost around $49.

mjfa · « **Reply #5 on:** October 04, 2005, 04:11:06 PM »

Try bending the barrel up or use some shims on the scope rings. Although an adjustable scope mount would be a better solution, that gun+scope doesn't worth the cost.

lostsniper308 · « **Reply #6 on:** October 05, 2005, 06:20:01 AM »

does Burris make air-gun/rimfire signatures with the inserts? tht would work.

IKE · « **Reply #7 on:** October 05, 2005, 11:42:25 PM »