Author Topic: 25 ACP breech plug question?  (Read 479 times)

0 Members and 1 Guest are viewing this topic.

Offline ourabmen

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
25 ACP breech plug question?
« on: October 21, 2005, 12:32:42 PM »
Hello and thanks for the info.  My 25 ACP breech plug just arrvied for my Omega, and I will be heading out to the range Saturday morning to she how she shoots.  My questions is how tight are you guys seating this plug when installing it? Any favorite plug grease you are using? Thanks for the info.

Sincerely,

OUrabmen
OUrabmen

Offline hiker270

  • Trade Count: (0)
  • Member
  • *
  • Posts: 33
25 ACP breech plug question?
« Reply #1 on: October 21, 2005, 01:24:35 PM »
I also use the 25 ACP conversion in my Omega. I only tighten my breechplugs finger tight. I have used both Super Lube synthetic grease (my favorite) and permatex anti-seize (works great but messy). Really any hi-temp. grease will work as well as teflon tape. You are just trying to keep any powder residue from getting into the threads and seizing them tight. I got in a habit years ago of breaking my breechplug loose every 4-5 shots when at the range just to make sure it does'nt  stick. Good luck with your 25 ACP conversion I'm sure you will like it. If the shells make your Omega hard to close, trim or file a little off the shell to shorten them up.

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
25 ACP breech plug question?
« Reply #2 on: October 21, 2005, 01:56:54 PM »
I also just finger tight my breech plugs. I use shooters choice high temp grease on the breech plugs. Never had a breech plug that was hard to remove. I love my 25 ACP breech plug.  :D
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline str8shooter48

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 353
25 ACP breech plug question?
« Reply #3 on: October 30, 2005, 02:15:35 PM »
With both the T/C and the 25 ACP plug in my Encore I use a coating of T/C Gorilla Grease and just snug the plug up, and never had a plug freeze up.

This is when shooting American Pioneer or 777.