Author Topic: Resizing .308/.243 Brass to 7mm-08 (Read 508 times)

muzzleblast525 · « **on:** November 13, 2005, 01:03:06 PM »

Is it worth it? Read on another site that you just run it through a FL sizer and you have the new brass. Can't be that simple, can it? I've got over 500 pieces of .308 once fire, and maybe 200 .243 pieces of brass.

clodbuster · « **Reply #1 on:** November 13, 2005, 01:16:54 PM »

Yes! Just check the length of the newly formed piece

longwinters · « **Reply #2 on:** November 13, 2005, 02:00:24 PM »

I did the 308 to 7m-08. Your resized brass will end up somewhat shorter than regular 7m-08 brass. Mine still shot MOA groups although POI was a couple inches different than the regular/factory 7m-08. I have not tried it with 243.

Long

Tom W. · « **Reply #3 on:** November 13, 2005, 02:35:48 PM »

When you do it, be sure to keep al of the reformed brass together, and away from any .308/.243 brass that you may still be loading.

I've tried the same thing with .270 and .280 brass to 30/06, and some 30/06 brass to .270, just to see if it could be done so easily. It can, but you must watch the length.