« previous next »
Pages: [1]   Go Down

Author Topic: Cleaning rifled slug barrell  (Read 330 times)

0 Members and 1 Guest are viewing this topic.

Offline Extremesolo

  • Trade Count: (4)
  • Member
  • *
  • Posts: 63
Cleaning rifled slug barrell
« on: November 15, 2005, 03:22:36 AM »
I posted this on the shotgun page as well but this one gets more traffic and alot of you guys have an accessory rifled slug barrell so hopefully you can help.  What is the best way to clean/polish a new 20 ga. USH barrell?  I just got one and also a .450 and I need to clean and sight them in.  Should I use JB on the slug gun just like all the other handi barrels or is there a better way?  Or should I just run some solvent soaked patches down it and shoot it without poslising it?  I will be shooting sabotted slugs so I do not really know if the barrell needs polished or not.  Thanks for any input.   Andrew
Logged
Stop telling God how big your problems are, and start telling your problems how big your God is!

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Cleaning rifled slug barrell
« Reply #1 on: November 15, 2005, 03:37:50 AM »
Since the barrel will be new..run a super tight patch thru the bore and see if it snags anywhere..if it doesn't..a few passes with flitz will polish it nicely...if it does..then polish it more...till your patches don't snag..you can feel the difference between those that are polished...and those that aren't on most new barrels..I've only had 1 barrel that just needed a few passes with the flitz...and that was my 45-70 Limited..You'll still need to clean everything out of it when you get it...the factory usually doesn't clean anything..and you'll get all kinds of junk out of them...

Mac
Logged
You can cry me a river... but...build me a bridge and then get over it...

Offline DanielWGriggs

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 317
Cleaning rifled slug barrell
« Reply #2 on: November 16, 2005, 02:05:35 AM »
What Mac says.
It would take even longer to "wear" a barrel in using plastic and the same with the muzzle loaders "sidekicks" using sabot or prb's.

Why isn't this in a sticky in the Shotgun forum/Muzzle Loader forum? along with the trigger/manufacturer dates?
Logged

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Cleaning rifled slug barrell
« Reply #3 on: November 16, 2005, 03:22:58 AM »
Quote
Why isn't this in a sticky in the Shotgun forum/Muzzle Loader forum? along with the trigger/manufacturer dates?


Perhaps you should ask the moderator there to do so...?

Mac
Logged
You can cry me a river... but...build me a bridge and then get over it...
Pages: [1]   Go Up
« previous next »