« previous next »
Pages: [1]   Go Down

Author Topic: Factory 44mag for deer recomendations?  (Read 1969 times)

0 Members and 3 Guests are viewing this topic.

Offline Markus

  • Moderators
  • GBO Supporter
  • Trade Count: (15)
  • Senior Member
  • *****
  • Posts: 1767
  • Gender: Male
Factory 44mag for deer recomendations?
« on: November 18, 2005, 03:42:01 AM »
I'm going to be using an encore with a 12"barrel and open sights. Range should be 50-100 yards tending toward 50 or less. I will not be reloading this year due to time and space considerations.
Logged
PROUD REDNECK CONSERVATIVE

I'd much rather be remembered for being a great shot than having the most expensive gun

Offline palgeno

  • Trade Count: (5)
  • Contributor
  • ***
  • Posts: 371
Factory ammo
« Reply #1 on: November 18, 2005, 04:07:51 AM »
Hornaday has an excellent 240 gr XTP factory load---very effective on deer---easy to duplicate if you hand load. If you are under 50 yds for the shot, just club 'em eith that Encore. Just kidding!!!! :) pg
Logged
"Do what you can,with what you have, where you are."  Theodore Roosevelt

Offline cattleskinner

  • GBO Supporter
  • Trade Count: (9)
  • Contributor
  • *****
  • Posts: 448
  • Gender: Male
Factory 44mag for deer recomendations?
« Reply #2 on: November 18, 2005, 05:46:15 AM »
Markus,

I'll have to agree, the xtp load is a good one for deer.  A buddy of mine in the guard with me shot a doe at about 40 yds. in the neck, and dropped her on the spot.  I used a reload last year with an xtp at about 75yds, and it completely passed through a yearling deer that was quartering towards.  My dad uses the Win. Partition Golds, and while he hasn't gotten a deer yet with it, he did turn a feral cat's head inside out.  The bullet when dug out of the ground looked just like the advertisements.  I've heard good things about the accuracy of the Platinum Tips, and if the pistol ammo performs anything like the muzzleloader sabots, you will have a dead deer.  I guess the point I'm trying to say is that, there are so many good choices now-a-days, you can't really go wrong.  But I would recommend the three that I just mentioned...good luck!!

~~~Amos
Logged
"You can't miss fast enough to win a gunfight"

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Factory 44mag for deer recomendations?
« Reply #3 on: November 18, 2005, 01:00:34 PM »
I have to agree with the others, Hornady has an excellent 240 gr XTP factory load.  :D
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline sk330lc

  • GBO Supporter
  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 1102
  • Gender: Male
Factory 44mag for deer recomendations?
« Reply #4 on: November 18, 2005, 02:26:48 PM »
The best two Factory loads out of my 12" Encore  Are, the Hornady 240Gr. XTP  and the Winchester white box 240Gr. JHC..
  My encore seems to like the .430 Dia. bullets the best..  I reload now using the XTP's in 240gr.  Have yet to take a deer with one but have take several ground hogs.  Makes a mess!

I have recovered Both of the above bullets, from wet news paper and the ground .. They both seem to penetrate well and mushroom as they should.  

Hope this helps  :grin:
Logged
Be True to What You Hunt!!!!!
SUPPORT THE GBO SERVER
http://www.gboreloaded.com/forums/index.php/topic,191112.0/topicseen.html

Offline Markus

  • Moderators
  • GBO Supporter
  • Trade Count: (15)
  • Senior Member
  • *****
  • Posts: 1767
  • Gender: Male
Factory 44mag for deer recomendations?
« Reply #5 on: November 20, 2005, 02:24:24 PM »
Thanks for the responses. I am going to have to pick up a box of those 240Gr xtp and give them a try. This will be my 1st handgun hunting since a few yotes and p. dogs back in the late 80's.
Logged
PROUD REDNECK CONSERVATIVE

I'd much rather be remembered for being a great shot than having the most expensive gun

Offline Gregory

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1482
  • Gender: Male
Factory 44mag for deer recomendations?
« Reply #6 on: November 20, 2005, 02:54:37 PM »
I would expect just about any factory 240 gr JHP will work for deer, just find the most accurate brand for your gun.
Logged
Greg

NRA Endowment Life Member
the right of the people to keep and bear arms shall not be infringed.
Second Amendment, U.S. Constitution (1791)

Offline Sgtshultzy1

  • Trade Count: (1)
  • Member
  • *
  • Posts: 74
Factory 44mag for deer recomendations?
« Reply #7 on: November 21, 2005, 10:14:22 AM »
Take a look at Federals Castcore bullets in 300 grains or Speers 270 grain Gold Dots.  I have taken several deer with each of them and they are awesome.
Logged

Offline John

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 326
Factory 44mag for deer recomendations?
« Reply #8 on: November 22, 2005, 08:41:59 AM »
I killed one with a Winchester 240gr. jacketed softpoint. It was what I had been using to practice with before I started loading my own, and I certainly couldn't have asked for a bullet to work any better.
Logged
Hey, hold my beer and watch this.

Offline Biscuits

  • Trade Count: (0)
  • Member
  • *
  • Posts: 67
Factory 44mag for deer recomendations?
« Reply #9 on: November 22, 2005, 08:45:20 AM »
Black Hills 300gr XTP worked good on my antelope- clean hole in and out no bloodshot meat just what I like to see.
Logged
"Meat Is Meat When It Is In The Pan, No Matter How Big The Horns Were."

Offline sawfish

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 215
  • Gender: Male
Factory 44mag for deer recomendations?
« Reply #10 on: December 15, 2005, 11:10:58 AM »
For many years, I hunted whitetails in the swamps and pine forests of the South with my Uncles and Cousins.  We mostly used the old Ruger Deerstalker carbines with Remington 240 gr. JHP ammo.  Many deer fell to this combination.  I still use the same bullet in my .44 Mag. Handguns today over a healthy dose of H-110.  If it ain't broke don't fix it.
Logged
No such thing as too dead.

Offline Mannlicher

  • Trade Count: (0)
  • Member
  • *
  • Posts: 95
Factory 44mag for deer recomendations?
« Reply #11 on: December 17, 2005, 09:50:33 AM »
One of the best ever for deer is Speer's 270 grain GDSP.  Another fine round is Georgia Arms 300 grain 'Deer stopper'
Logged
Nemo Me Impune Lacesset

Offline Old Griz

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2030
  • Gender: Male
Factory 44mag for deer recomendations?
« Reply #12 on: December 21, 2005, 10:19:52 AM »
:cb2: Every gun is different and likes different loads. The most accurate factory load out of my scoped Bisley is the 300-gr. Federal CastCore. a very close second is the 270-gr. Speer Gold Dot. cattleskinner mentioned the Winchester Platinum Tips. I have not tried these in any of my .44s but they are terrific performers in my .41.

Well there's my 2¢ worth. Good luck. I hope you find your load without having to spend a fortune on ammo!  :grin:
Logged
Griz
<*}}}><

I Cor. 2.2 "For I determined not to know anything among you, save Jesus Christ, and him crucified."

Offline Old Griz

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2030
  • Gender: Male
Factory 44mag for deer recomendations?
« Reply #13 on: December 21, 2005, 10:21:23 AM »
:cb2: Every gun is different and likes different loads. The most accurate factory load out of my scoped Bisley is the 300-gr. Federal CastCore. a very close second is the 270-gr. Speer Gold Dot. cattleskinner mentioned the Winchester Platinum Tips. I have not tried these in any of my .44s but they are terrific performers in my .41.

Well there's my 2¢ worth. Good luck. I hope you find your load without having to spend a fortune on ammo!  :grin:
Logged
Griz
<*}}}><

I Cor. 2.2 "For I determined not to know anything among you, save Jesus Christ, and him crucified."

Offline LarryL

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 157
  • Gender: Male
  • 2004 - 480 SRH
Corbon?
« Reply #14 on: January 02, 2006, 08:55:11 AM »
I carried the 260 gr Corbon hunting load in my Ruger SBH for several years.  It shot well on the range, but I never got the opportunity to try it on a deer.  Now I carry the .480 Ruger, so maybe I'll never know.  It looks like a great load on paper.  They quote 1450 fps out of an 8-3/8" barrel, but I'm sure it is slower in my 5-1/2" barrel.

Anyone out there have experience with Corbon loads on deer?
Logged
Success is a journey, not a destination...  Might as well enjoy the ride!! 

Just remember, when seconds count, the police are only minutes away.  You can rely on 911 or on 1911. The choice is yours.

Larry

Offline sawfish

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 215
  • Gender: Male
Factory 44mag for deer recomendations?
« Reply #15 on: January 23, 2006, 10:46:53 AM »
8) IMHO, the Cor-Bon loads are a bit much for deer, but they work well on the heavier animals.
Logged
No such thing as too dead.

Offline moose

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 240
Factory 44mag for deer recomendations?
« Reply #16 on: January 23, 2006, 02:14:14 PM »
i shot some 'borrowed" ammo last weekend on a hunt,( left mine at home :-D ) i shot a doe with PMC Starfire out of my 44 mag super 14" T/C Contender..........that ammo did some damage........deer ran 20 steps and was DEAD!!!!!!!
Logged

Offline slave

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 287
  • Gender: Male
Factory 44mag for deer recomendations?
« Reply #17 on: January 23, 2006, 04:00:53 PM »
I like the 225gr Barnes xpb. I think Federal loads it in one or two of there lines if you do not have the dies. They should work good on deer under 75yds.
Logged
keep your powder dry !!!

Offline longwalker

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 317
more mud for the water
« Reply #18 on: January 25, 2006, 04:32:57 AM »
I use Federal American Eagle brand, 44 magnum in 240 Grain JHP bullets. They shoot very well in my SRH do the job in a big way in deer. The sad news is I have a life time supply of hunting ammunition. Two boxes!

Try as many different brands as you can. You may very well find a load that will shoot just fine in your gun. As far as the projectile goes I have not had any problems, with the JHP Bullets.

longwalker
Logged
Pages: [1]   Go Up
« previous next »