« previous next »
Pages: [1]   Go Down

Author Topic: 6.8 Rem SPC range report  (Read 1142 times)

0 Members and 1 Guest are viewing this topic.

Offline Neutron

  • Trade Count: (0)
  • Member
  • *
  • Posts: 44
6.8 Rem SPC range report
« on: February 06, 2006, 04:52:51 PM »
Made the mistake of getting ahold of Ed this week and now I have a 6.8 spc carbine barrel for my G2.  Ed has some ammo so I got a box of the Remington 115 gr OTM.   Ed had good things to say about the 6.8. Previous stuff I had seen on the internet had people getting nearly 2750 from 22-24" barrels.  I chronographed two rounds and got about 2615 fps.  I do not know if it being a brand new barrel would make any difference in muzzle velocity, but I was a little dissappointed since the advertised velocity is 2800 fps.  However the accuracy was good. Once I got it on the paper at 100 yds I shot a 3 shot group that measured 0.69 inches.  Then a 5 shot group at 100 yds.  3 of the 5 were in the x ring (0.69" again) and one was on the border between 9 and 10, had one flyer still in the 9 that I probably pulled after seeing the first one in the bull.  The 4th shot opened the group to 1"and the flyer made the group total group 1 7/8".   Very little kick but some muzzle blast and a little barrel rise.  I have some Silver State ammo on order.  I called them and asked about muzzle velocity and they thought I would get around 2775 fps with their 110gr pro hunter load in the carbine.  I will chrono it and see.  They said they had to reduce the load in their 115gr because it was a little too hot for the AR rifles to cycle well.  Remington appears to have backed off their loads 150+ fps or so since some of their reported early loads.  Anyone else chronographed any recently made factory ammo in a encore or contender carbine?  Anyone got any info on handloads other than what is posted on IMR and Hodgdon sites?  I think I am really going to like this caliber and despite what one article indicates handloads should be able to equal or better the box of factory ammo that I have.
Logged

Offline Robert

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1618
6.8 Rem SPC range report
« Reply #1 on: February 07, 2006, 05:49:54 AM »
The report that I heard was that they are using a special powder that is not available to handloaders.  I heard this a long time ago and I do not know if it is true.
Logged
....make it count

Offline Neutron

  • Trade Count: (0)
  • Member
  • *
  • Posts: 44
6.8
« Reply #2 on: February 08, 2006, 04:00:30 PM »
In order to get near 2800 fps with a 115 grain bullet they must be using powders that handloders cannot get.  I got some Hornady ammo and some Silver State in and I will chrono them hopefully next weekend.  The Silver State comes in little boxes more like 223 comes in sometimes with no foam so they take up very little room.  The Hornady box quotes 2550 fps out of apparently a 16" barrel.  It will be interesting to see what it does out my 23".
Logged

Offline chrome

  • Trade Count: (0)
  • Member
  • *
  • Posts: 25
6.8 Rem SPC range report
« Reply #3 on: February 08, 2006, 04:19:24 PM »
I had a Remington Light tactical with the 22" barrel and was getting 2,705 fps with the 110 gr. V-max (using handloads of course).

Never fired any factory ammo.
Logged

Offline spinafish

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 1161
  • Gender: Male
6.8 Rem SPC range report
« Reply #4 on: February 10, 2006, 02:06:28 PM »
I e-mailed Ramshot and they forwarded some loads for the 6.8 SPC.  I also have a 23" rifle barrel.  Have shot only Silver State ammo to date.  Makes pretty little mushrooms..deadly little mushrooms, when fired into wet phone books..
Logged
the most heartwreching words any man will ever hear
"depart from me, I never knew you"  Jesus
We may ignore, but we can nowhere evade the presence of God. The world is crowded with Him. He walks everywhere incognito.” C.S. Lewis

Offline jason280

  • Moderator
  • Trade Count: (7)
  • A Real Regular
  • *****
  • Posts: 539
6.8 Rem SPC range report
« Reply #5 on: February 11, 2006, 12:10:26 PM »
Which of the RamShot powders are you using for the 6.8?  I'm working on some 130gr loads now, but haven't tried any RamShot powder.
Logged
"Hey Peter, check out Channel 9!!"

Offline spinafish

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 1161
  • Gender: Male
6.8 SPC RAmshot data
« Reply #6 on: February 12, 2006, 05:19:39 AM »
I haven't used any yet..waiting on dies and brass.  When I contacted Ramshot they sent me data for their X-terminator powder:  with the 90 grain Sierra HP  start load is 30 grains and Max is 32.5, with the 110 grain Hornady V-max, starting load is 26. grains and max is 29.5, with the Sierra 130 SPTBT; start is 25. and the max is 27.5..all have aCOL of 2.260".
Logged
the most heartwreching words any man will ever hear
"depart from me, I never knew you"  Jesus
We may ignore, but we can nowhere evade the presence of God. The world is crowded with Him. He walks everywhere incognito.” C.S. Lewis

Offline panman

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 246
  • Gender: Male
6.8 Rem SPC range report
« Reply #7 on: April 19, 2006, 02:17:40 AM »
Hay guys,i have one yo,26" barell.It sure would be nice if you would share your load data,heavy or light bullets,and powders.I have been shooting bows for a few years,and just geting back in to shooting guns again.[Just cant stand staying away lol].Im waiting for some dies.Those rounds are to expencive for me,so reloading is the way to go.thanks for any and all information.pan.
Logged

Offline Maine Woods

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 105
6.8 spc
« Reply #8 on: April 20, 2006, 02:21:48 AM »
Hi All I have a 23" contender barrel coming from Ed ( who else :roll: ) who is makeing dies for 6.8 and what shell holder are you useing? I will use factory brass after I empty it :grin:  Thanks John.
Logged

Offline Maine Woods

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 105
6.8 Rem SPC range report
« Reply #9 on: April 20, 2006, 09:45:39 AM »
Hi again I found Hornady dies and shell holder. :oops:
Logged
Pages: [1]   Go Up
« previous next »