Author Topic: twist rate?  (Read 238 times)

0 Members and 1 Guest are viewing this topic.

Offline charlie45

  • Trade Count: (0)
  • Member
  • *
  • Posts: 70
twist rate?
« on: February 06, 2006, 01:55:10 PM »
:grin: I seem to remenber reading that the twist rate for the m96 6.5 x 55 mauser was  8 7/8". now i've read other post stating  it was 1 in 7". I am thinking of tring cast bullets and need to know.
Thanks
if its worth doing, finish it!

Offline Larry Gibson

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1069
Re: twist rate?
« Reply #1 on: February 06, 2006, 06:18:28 PM »
charlie45

"I seem to remenber reading that the twist rate for the m96 6.5 x 55 mauser was  8 7/8". now i've read other post stating  it was 1 in 7". I am thinking of tring cast bullets and need to know."

The twist is officially in metric measurement but is generally conceded to be a 1-7.5" twist.  With cast bullets of 120 to 160 gr your best accuracy (1 to 2 MOA at 100 yards) is going to be around 1400-1500 fps. Reasonable accuracy (3-4 MOA at 100 yards) can be obtained upwards of 1700 fps but regardless of how hard you cast the bullets, what lube you use or what powder you use the deciding factor is RPMs and the 1-7.5" twist revs the bullets up pretty fast.

 Larry Gibson

Offline Mikey

  • GBO Supporter
  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
twist rate?
« Reply #2 on: February 07, 2006, 02:47:22 AM »
All my literature shows the twist rate of the 1896, whether carbine, short or long rifle at 1 in 7.5".  Mikey.

Offline charlie45

  • Trade Count: (0)
  • Member
  • *
  • Posts: 70
I was ready!
« Reply #3 on: February 07, 2006, 11:29:57 AM »
:grin:
I was ready to give up on the m96, but might not a 150/160 grainer hard cast gc fly well at this twist and at moderate speeds? :roll:
if its worth doing, finish it!