Author Topic: BC Questions  (Read 785 times)

0 Members and 1 Guest are viewing this topic.

Offline AZ223

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 267
BC Questions
« on: December 01, 2005, 03:08:34 PM »
As a Handiholic, I've managed to restrain myself somewhat, only purchasing a .17HMR and .223 Ultra in the past year and a half. I've been curious about the .45-70, but have only handled the Handi version. I was at Sportsman's Warehouse today, and looked at the BC, and I'm amazed at how well balanced it is, considering the 32" barrel. The peep sight seemed easy to use; my eyes are getting older, and I don't mind the look of some of the BC's I've seen with scopes on them, but we'll see.

My question is this: Being a bit of a recoil wuss, is it easy to find a recoil pad that will fit the curved butt of the BC? I had trouble finding one for a Rem 700BDL, and finally went with a Limbsaver grind-to-fit, and the fit is marginal at best, but it does work. That rifle weighs barely 7# with a scope, and the BC's metal butt plate was painful just to look at!

The H&R .45-70 seem to have very good accuracy from what I've read, and I'm not sure I'll be able to hold off much longer. I was going to save for a .375H&H (one of my dream rifles), but at $299 for the BC, I'm not sure what I'll do!
Life was so much simpler when I thought I knew everything...

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
BC Questions
« Reply #1 on: December 01, 2005, 03:42:58 PM »
You can cut the butt off square and add the recoil pad of your choice, or you can use a Galco leather slip-on, not as good as a Limbsaver, but looks nice and retains the original stock.

http://img.photobucket.com/albums/v386/quickdtoo/45-120BC2.jpg">

Here's a better pic of the pad...

"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bulldurham

  • Trade Count: (0)
  • Member
  • *
  • Posts: 34
BC Questions
« Reply #2 on: December 02, 2005, 04:15:03 PM »
howdy ya fellow arizonian,

for someone thats a lil shy of recoil your shore got some funny dream rifles :) .

if it was me to kinda keep with the traditional look of the rifle i'd go to a saddle shop and get em' to make me a leather recoil pad with rawhide lacing(put on wet so it tighten up) or have em' build one to cover one them ugly lookin' recoil pads they sell at the mart i got one made by limbsaver on my handi it isnt too ugly but we do have few saddle shops round here so ill just leave it there for a few days see if they can build me one that covers that one up so it dont look too bad.

Offline LUMBERMAN

  • Trade Count: (0)
  • Posts: 2
BC Questions
« Reply #3 on: December 06, 2005, 01:48:26 AM »
What size GALCO did you use and where did you buy it?

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
BC Questions
« Reply #4 on: December 06, 2005, 06:31:09 AM »
I think it's a small, bought it from Mac11700,  but they're available at Cabelas....

Galco Pads

And welcome aboard!! :D
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline LUMBERMAN

  • Trade Count: (0)
  • Posts: 2
BC Questions
« Reply #5 on: December 06, 2005, 07:43:23 AM »
Thanks quickdtoo  :grin:

Offline Fred M

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2362
    • Fred The Reloader and Wildcatter
BC Questions
« Reply #6 on: December 06, 2005, 08:36:07 AM »
Limb saver makes a slip on pad I have one on my Win 20g O/U/. I works well with 3" magies.
Fred M.
From Alberta Canada.

Offline slayer

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 937
BC Questions
« Reply #7 on: December 06, 2005, 11:12:20 AM »
That Galco is very nice looking, and I was really interested until I saw that it cost $49.99. It must be a very nice peice for that much. They also have over the shoulder straps that go onto your shoulder with a strap. Had one years ago and lost it :( I don`t mind the recoil of my B/C, but I haven`t tried Buffalo Bore or +P`s in it yet, the strongest being Rem Core Lock, so only up to medium so far. I don`t think I nead any stronger, it is just for Whitetails up to 100 yards, but I would want the very hot ones if I was hunting Elk and Grizzly or even Moose, don`t want to chase them too far ya know :) Jack.

Offline CHUNK

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
Tameing BC Recoil
« Reply #8 on: December 06, 2005, 11:30:41 AM »
Try taking butt plate off and filling with # 7 1/2 or #8 shot, adds about a 1 lb. Or try lighter loads , such as Unique and lead bullets.

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
BC Questions
« Reply #9 on: December 06, 2005, 12:31:09 PM »
Here is another option, get the BC and replace the buttstock with a H&R TDC checkered american black walnut buttstock with a recoil pad. It matches the forearm exactly and will help take away the sting from the 45-70. Those H&R walnut buttstocks are pricy but you might manage to find someone here willing to trade a new BC buttstock for a new TDC buttstock. They cost just about the same. As a matter of fact I may be willing to make the swap if and when you get a BC. I have a new checkered walnut TDC buttstock sitting here!!!  Contact me if your interested. Maybe I can help you out....<><.... :grin:
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
BC Questions
« Reply #10 on: December 06, 2005, 12:45:09 PM »
This is what the TDC stock looks like on a BC...

"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
BC Questions
« Reply #11 on: December 06, 2005, 12:52:19 PM »
Thanks Quick!!!....<><.... :grin:
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline AZ223

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 267
BC Questions
« Reply #12 on: December 06, 2005, 04:02:30 PM »
That is a good-looking stock. I didn't see the TDC stock on H&R's Web site...? My favorite stock for the Handis is the Cinnamon laminate; looks great on my .223 Ultra.

bulldurham -- I do have some interesting dream rifles, considering what I posted. But it's also the challenge to overcome it that has me interested. I enjoy shooting, as a skill to improve and a way to overcome perceived limitations.

Thanks for the input!
Life was so much simpler when I thought I knew everything...

Offline Grizzx2

  • Trade Count: (0)
  • Member
  • *
  • Posts: 30
  • Gender: Male
  • Tim's Mug Shot
BC Questions
« Reply #13 on: December 07, 2005, 10:47:22 PM »
What I did was go with the LimbSaver small slip on and covered it with a lace on sling. Works fine for me.
LimbSaver
Sling
Grizzx2
      
      H&R 1871 B C                       
      H&R  .17 HMR                       
      Marlin Centennial 444             
      T/C Encore .300 Win Mag        
      T/C New Englander                
      T/C White Mountain Carbine

Offline gstanfield

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
BC Questions
« Reply #14 on: December 08, 2005, 09:09:58 AM »
Another option is to leave the gun alone and buy a PAST shoulder pad and wear it under your shirt so your friends don't see it 8) It will tame the recoil tremendously and then you hand the rifle to them to shoot and it kicks them so hard they will then think you are Superman :) Not that I'd do that :oops: but I will vouch for the PAST pad for the BC even after rechambering it to 45-120 :shock:

George
I Peter 2:17 Respect all people, Love the brotherhood, fear God, honor the King.

Offline slayer

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 937
BC Questions
« Reply #15 on: December 08, 2005, 11:04:42 AM »
That`s it!! PAST shoulder pad. I can`t find mine to save my life :( If I can`t find it, I will buy the Small slip on pad for the range. Thanks-Jack.