« previous next »
Pages: [1]   Go Down

Author Topic: Vhita Vhouri N-133  (Read 487 times)

0 Members and 2 Guests are viewing this topic.

Offline jason280

  • Trade Count: (7)
  • A Real Regular
  • ****
  • Posts: 539
Vhita Vhouri N-133
« on: December 01, 2005, 01:21:24 PM »
Anyone tried VV N-133 powder in a 7mm TCU, or any other cartridge?  I found a 2lb jug of it yesterday for $29, and finally had a reason to buy some to try.  I have seen pretty good velocities with it in the TCU, but saw it can also be used in the .223.  

Anyone have experience with the powder?
Logged
"Hey Peter, check out Channel 9!!"

Offline Steve P

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 1733
  • Gender: Male
Vhita Vhouri N-133
« Reply #1 on: December 02, 2005, 03:59:43 PM »
I use it in 7TCU and 6.5TCU.  I don't recall the exact load, I think it is 23.5 grains for 7TCU with a 150 grain bullet, but don't quote me on that.    6.5TCU I use 24.0 grains with my own jacketed bullet that weights 120 grains.    All my loads use WSR primers.  Bullets seated no lower than base of neck.

Good Luck,

Steve :D
Logged
"Life is a play before an audience of One.  When your play is over, will your audience stand and applaude, or stay seated and cry?"  SP 2002

Offline drichi

  • Trade Count: (1)
  • Member
  • *
  • Posts: 77
vv n-133
« Reply #2 on: December 11, 2005, 06:39:59 AM »
I have had outstanding results with this powder in the 223.
Logged
Pages: [1]   Go Up
« previous next »