« previous next »
Pages: [1]   Go Down

Author Topic: Barrel Breech Gap  (Read 396 times)

0 Members and 3 Guests are viewing this topic.

Offline JPH45

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1145
Barrel Breech Gap
« on: December 27, 2005, 12:40:34 PM »
I just got a 375 JDJ barrel (Thompson Center), and when I put in on my Encore frame, there is a gap of .006" Lock up is absolutely postively tight. The same gap exists with my 209 x 50 barrel Lock up is tight on it as well, and the barrel shoots like a house afire. It will stack Lee's 429-310-RF in Knight sabots pushed with 110 grians of Pyrodex on top of each other as long as I care to shoot, so the gap doesn't seem to resent any particular problem near as I can tell, just curious if it is within normal parameters of what you guys have seen.
Logged
Boycott Natchez Shooters Supplies, Inc

Offline jeff223

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1284
Barrel Breech Gap
« Reply #1 on: December 28, 2005, 01:35:52 AM »
John thats the way all my barrels fit on my G2.thats just the way it is.

how does the 375jdj shoot?

glad to here about your new Encore muzz loader shooting so good for you and with your own cast boolits too :mrgreen:

308 sent me some of those Lee 310 cast boolits to try in my 445sm  tender but i havnt yet.it would something if they shoot good out of that barrel.if they do it will be time for another boolit mold
Logged

Offline .308

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 489
Barrel Breech Gap
« Reply #2 on: December 28, 2005, 09:09:26 AM »
How about another mold deal, this time a copy of the 265/280 gr. beartooth or the Lee 310 gr. only sized .433/.434" for us guys with the Handi barrels with a .432" bore. For folks like you with the Contenders all you have to do is size 'em .430" using a Lee sizing kit. I nominate you honcho Jeff. Do I have a second? 8)
Logged

Offline JPH45

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1145
Barrel Breech Gap
« Reply #3 on: December 28, 2005, 02:55:44 PM »
Quote from: jeff223
John thats the way all my barrels fit on my G2.thats just the way it is.

how does the 375jdj shoot?

glad to here about your new Encore muzz loader shooting so good for you and with your own cast boolits too :mrgreen:

308 sent me some of those Lee 310 cast boolits to try in my 445sm  tender but i havnt yet.it would something if they shoot good out of that barrel.if they do it will be time for another boolit mold


I'll be trying the rifle out tomorow or Friday afternoon, got ten rounds loaded up, depends on the weather, I'll let ya know.....

And to think I almost sent that mold to you as I'd had no luck with it from my Handi :roll:

308, Doesn't Lee offer the 310 as a 6 banger? Seems to me at this point in the game that casting the bullet from softer alloy that would more readily bump up holds the possibility of making it shoot in those oversized barrels. What do ay think? PM me on it
Logged
Boycott Natchez Shooters Supplies, Inc

Offline .308

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 489
Barrel Breech Gap
« Reply #4 on: December 29, 2005, 06:03:29 AM »
Well I FINALLY got in. I have 3 meg. DSL and just checked the speed and she's flying, that is to everywhere but here. :?  

Anyhow, John you may or may not have a P/M. Lamar :?

BTW, I sent you an email as a back-up. 8)
Logged
Pages: [1]   Go Up
« previous next »