Best Load For The .270 H&R Ultra Hunter Useing IMR 4320

[rms4570hr]

Does any one know a good 270 hand load for the H&R Ultra Hunter in .270 useing IMR 4320,CCI 200 Primers and 140 Gr. bullets.




Thank's
rms270hr

[oliverstacy]

Don't know if your looking for only 140 gr loads or not but I have tried...

53.1 gr IMR-4350
130 gr Speer Grand Slam
CCI-200 Primer
Win. Case

shoots around 1" to 1-1/4"

55.5 Gr. AA-3100
140 Gr Accubond
Win. Case
CCI BR-2 (not sure if the BR-2 is the large rifle primer or the BR-4 is the large rifle primer) But I use the BR large rifle primer.

I shot a three shot group of .441" with this load and average under an inch for all 3 and 5 shot groups.

Josh

[aulrich]

I learnd this lesson the hard way with my handi's (and probably my bolt guns too) but mine showed real load secitivity. You need to work-up a load for that gun.  Go from the starting load to max-1 in .5 of a grain (I was working on a 204 270 may take a bigger step) then at max -1 go up by .2.

I used to use loads from use Ken Waters "Pet loads" and usually 1 or 2 tries produced a good load. It did not work well with my 243. And of course 204 did not exsist.  So I was forced to work-up and it paided off, I was able to get every bullet I tried to shoot sub moa most pushing .5 moa really hard. with my best load +- .2 from the sweet spot and the groups doubled.