Author Topic: NEF in 8x57 Mauser? (Read 534 times)

lgm270 · « **on:** January 06, 2006, 03:02:42 PM »

I'm thinking of having an NEF .308 rebored and re-chambered to 8x57 Mauser. Any thoughts?

Does anyone know a manufacturer of aftermarket NEF barrels like you can get for the Thompson Center Contender?

Fred M · « **Reply #1 on:** January 06, 2006, 03:39:51 PM »

lgm270.

Quote

308 rebored and re-chambered to 8x57 Mauser. Any thoughts?

This wont work. 308 chamber wont clean up. You can't make much out of 308Win except a long Imp like an 8mm-06AI or a 338-06AI.

kenbev · « **Reply #2 on:** January 06, 2006, 03:54:09 PM »

Mart's Custom was not a good fellow to deal with. He still owes me alot of money...

Fred M · « **Reply #3 on:** January 06, 2006, 04:21:49 PM »

Tim.

Quote

This wont work. 308 chamber wont clean up. You can't make much out of 308Win except a long Imp like an 8mm-06AI or a 338-06AI.

That is what I said in my post. Or is my post not understandable? What I am at loss with is. what can a 8x57 do that you can/t do with a 308.

mitchell · « **Reply #4 on:** January 06, 2006, 04:26:59 PM »

i got you just fine fred i think quick was just restateing

but he broung pics

(just messin with ya)

JPH45 · « **Reply #5 on:** January 06, 2006, 04:49:34 PM »

Quick, What is that second drawing, 8x57R???

JPH45 · « **Reply #6 on:** January 06, 2006, 04:52:29 PM »

lgm270 Not to be a kill joy, but I"m curious. Why the 8x57?

Fred M · « **Reply #7 on:** January 06, 2006, 05:36:57 PM »

mitchell
The last time someone wanted to make a 280 or a 7x57 from a 7mm-08, I said it can't be done. Quick posted the cartridge drw, and nobody could make any sence out of the drawings.

Man, they finally found a guy that actually measured the two cases with a micrometer. After the measuring he still was not sure it coud be done or not..

Dirigo · « **Reply #8 on:** January 06, 2006, 05:52:48 PM »

why not go with a 223 or 22 hornet to start with?

Mac11700 · « **Reply #9 on:** January 06, 2006, 05:54:56 PM »

I'm with you Tim...for all practicle purposes...if one was going to go to the expense of a rebore..it they might as well get the best available going...a 8mm...isn't bad...and has taken quite a-bit of animals and with all the interest the gun rags are playing to the 325WSM..it's no wonder folks are looking at it a bit closer.....but..if I were wanting to say completly redo a 308 Bull barrel...the 338-08 would be the way I do it..and since Federal is going to come out with the ammo for it...it sure as heck will be a cheaper proposition for factory ammo than we have for our 338-06's...Heck...maybe we need to get 1 apiece to go along with it's bigger brother :wink:

Mac

lgm270 · « **Reply #10 on:** January 06, 2006, 05:57:16 PM »

Yes. You're absolutely right about the .308 chamber having less taper than the 8x57 and it would not "clean up", unless I had it made into an 8x57 improved.

I also considered starting with a bull barreled .223 and going from there. Of course the extractor would have to be altered to accomodate the larger .532 sized case head.

Why the 8x57? I like the cartridge and cheap surplus ammo is still available.