Author Topic: 22-250 and Blue Dot  (Read 475 times)

0 Members and 1 Guest are viewing this topic.

Offline tradegun

  • Trade Count: (0)
  • Member
  • *
  • Posts: 33
22-250 and Blue Dot
« on: January 10, 2006, 06:38:18 AM »
I have seen references to 14grs of Blue Dot under a 40gr bullet as a good reduced load ( approx. 22 hornet type preformance). I would like some input from an actual user, I have a Rem 700 VSSF and am looking for just such a round to eliminate some short range (less than 100 yds. ) chucks this summer. If you have had good success and do not mind sharing information please advise

Offline Steve P

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 1733
  • Gender: Male
22-250 and Blue Dot
« Reply #1 on: January 10, 2006, 04:20:35 PM »
Use about 38.0 grains of H380 with 40 grain hp bullets.   If chucks are 100 yards or less, wear your rain gear!!   :shock:

If it is not in the book, I dont use it in my bottle neck rifle cases.  You can check with Alliant on reduced loads.  

I do have some proven loads with bottle neck cases in my Contenders.  However, not with a .22 caliber with large capacity case like 22-250.  

Hodgdon does have some reduced loads for youth using H4895.  It is a powder listed for the .22-250 so should work for you.

http://www.hodgdon.com/data/youth/index.php

Steve   :D
"Life is a play before an audience of One.  When your play is over, will your audience stand and applaude, or stay seated and cry?"  SP 2002

Offline Lone Star

  • Reformed Gunwriter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2359
  • Gender: Male
22-250 and Blue Dot
« Reply #2 on: January 11, 2006, 03:15:39 AM »
I have not tried BlueDot in my .22-250 but it works great in my .223s.  Go here for a little more info:

http://www.reloadingroom.com/page33.html