Author Topic: Fired My new Handi Today! (Read 1169 times)

one$$shot · « **on:** January 16, 2006, 08:39:38 AM »

I followed the break-in procedure listed under sticky faq's. I'm very pleased with the results. This is a 243S43 with an older Redfield Widefield TV style 4X scope. The arrangement is very sweet!

cheatermk3 · « **Reply #1 on:** January 16, 2006, 01:24:06 PM »

Hey that's good to hear. What load did you use?

PS welcome to the forum!

bladerunner · « **Reply #2 on:** January 16, 2006, 02:13:58 PM »

glad ya like it

what did it do? what kind of groups will it print?

one$$shot · « **Reply #3 on:** January 17, 2006, 04:07:43 AM »

I'm shooting the cheap Remington Express 100 gr. 243W3 I think is the number on the box. I cleaned it after every shot for the first 20 shots. Then I cleaned it after every third shot for the next 20. I used the J-B paste on it first of course according to the faq break-in before firing it. Next I'll be using the foam to check for copper fouling. I'm so pleased with this gun I can't hardly take it. I haven't checked it for groups yet except at 50 yards. Nice and tight at close range.

mitchell · « **Reply #4 on:** January 17, 2006, 05:27:51 AM »

Quote from: one$$shot

I'm shooting the cheap Remington Express 100 gr. 243W3 I think is the number on the box. I cleaned it after every shot for the first 20 shots. Then I cleaned it after every third shot for the next 20. I used the J-B paste on it first of course according to the faq break-in before firing it. Next I'll be using the foam to check for copper fouling. I'm so pleased with this gun I can't hardly take it. I haven't checked it for groups yet except at 50 yards. Nice and tight at close range.

thats just how i brake in every new gun i get (great minds think alike)

sounds like you got a shooter keep us posted.

motivationteam · « **Reply #5 on:** January 19, 2006, 02:30:52 PM »

Break-In with that method would take some serious time and effort to do. How much time does a guy need to block out to acheive such a thing.

quickdtoo · « **Reply #6 on:** January 19, 2006, 02:44:55 PM »

Quote from: motivationteam

Break-In with that method would take some serious time and effort to do. How much time does a guy need to block out to acheive such a thing.

A complete cleaning/polishing session is gonna take you 2-3 hrs minimum. See the FAQ for details.

mitchell · « **Reply #7 on:** January 19, 2006, 04:18:20 PM »

Quote from: quickdtoo

A complete cleaning/polishing session is gonna take you 2-3 hrs minimum. See the FAQ for details.

4-5 on the mine, and even though i lap i still shoot like that on the first 50rds . Whatever makes me happy

Mac11700 · « **Reply #8 on:** January 19, 2006, 07:14:35 PM »

Quote from: motivationteam

Break-In with that method would take some serious time and effort to do. How much time does a guy need to block out to acheive such a thing.

For mine..it will depend on how many tight spots I find initially, I've gone back and done another complete lapping on 1 of them after shooting a box of factory in it.I use a extreamly tight combo of oversized mop & patches,and a heavy duty 1 pc. stainless rod.

Mac

one$$shot · « **Reply #9 on:** January 21, 2006, 11:52:13 AM »

Mac: Which one piece cleaning rod would you use on your own new .243 Handi if you were to buy one today?

The J-B bore cleaning compound (blue print on jar) is okay to do lapping with is my understanding. I see J-B also has a product called Bore Bright. I take it this is a finer grade of polishing compound? I appreciate your description Mac as to feeling the rod for uniformity as it glides up and down the barrel.
I'll pay closer attention to this.

Anyone have a favorite lapping compound that is safe to use?

quickdtoo · « **Reply #10 on:** January 21, 2006, 12:00:53 PM »

I've used several products for bore polishing/lapping. JB non-embedding bore compound as well as Bore Bright which appears to be jeweler's rouge both work fine. I've also used Flitz, USP Paste, Maas and Simichrome. Use what you have or what you can get. The main thing is to make sure the rod doesn't come in contact with the bore, even with mild abrasives like these, rod contact in the throat or muzzle can cause damage, so use a good bore guide. :wink:

Mac11700 · « **Reply #11 on:** January 21, 2006, 12:23:59 PM »

I have their 3pc rod and have used their one pc rod a few times..and really like it how they feel...http://www.proshotproducts.com/page3.html When ever I go to the range...their 3pc is with me in my shooting bags..and like it's been said..use a bore guide when cleaning..it helps..These folks have a-lot of good products..and so does quite a few others...Tipon makes a great rod as well...so does Ox-Yoke...I have a couple of their originals..but I prefere the metal handles of Pro-Shots...much better..and when I pick up 4 new ones later this spring will be getting them..

Mac

one$$shot · « **Reply #12 on:** January 21, 2006, 02:01:45 PM »

I've decided on the 26"one piece Pro-shot stainless steel rod. Any suggestions on a good quality bore guide to go along with it? Does Pro-shot offer a bore guide for their rods? What about Jags? Is there a brass jag that might be a little better than others.

I sure appreciate the help fella's.

Mac11700 · « **Reply #13 on:** January 21, 2006, 08:38:26 PM »

It's made by Sinclair International...model is the RSX..it is designed for the TC but should work

http://www.sinclairintl.com/cleaning.html

Look on the second page..

Mac

one$$shot · « **Reply #14 on:** January 22, 2006, 12:59:37 AM »

Thanks Mac and Tim. You guys are saving me a ton of time and frustration. I've been weeding through the internet and finding what I consider to be less than adequate products. How else can you find the good stuff unless someone else gives you a tip. I see this RGX model and that's exactly what I was after Mac. Thanks again you guys for helping a newbie.

Much appreciated!

http://www.sinclairintl.com/cgi-bin/category.cgi?category=CPCRGSR&item=RGX&type=store

one$$shot · « **Reply #15 on:** January 22, 2006, 01:17:41 AM »

I had to come back and make this comment. I'm having waaaay to much fun on Sinclair's web page. Good thing my charge card is in the other room and I'm to tired right now to get up and get it! :grin:

quickdtoo · « **Reply #16 on:** January 22, 2006, 06:31:04 AM »

Here's the style I use, they also come in a black nylon...they self center in the chamber....

http://secure.armorholdings.com/kleen-bore/product376.html

one$$shot · « **Reply #17 on:** January 22, 2006, 01:13:21 PM »

How about Corbin's Bore Lap. Anyone know about this stuff versus J-B paste?