Author Topic: 44 hard cast SWC  (Read 616 times)

0 Members and 1 Guest are viewing this topic.

Offline Doc Contender

  • Trade Count: (0)
  • Member
  • *
  • Posts: 46
44 hard cast SWC
« on: March 18, 2003, 07:59:45 AM »
How many grains of h110 should be used for use in super red hawk?

Offline Larry Gibson

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1069
Re: 44 hard cast SWC
« Reply #1 on: March 18, 2003, 10:11:26 AM »
Quote from: Doc Contender
How many grains of h110 should be used for use in super red hawk?


What weight bullet??????????

Offline Doc Contender

  • Trade Count: (0)
  • Member
  • *
  • Posts: 46
44 hard cast SWC
« Reply #2 on: March 18, 2003, 02:07:11 PM »
Sorry!  Bullets are 240 grain hard cast.

                                      Doc Contender

Offline Larry Gibson

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1069
44 hard cast SWC
« Reply #3 on: March 19, 2003, 07:03:42 AM »
Doc Contender

Work up to 24 gr of H110 with the hard cast 240s.  I use WLP primers and have had consistant ignition.  I have had very good performance with that load in a Hawes and RBH with 240 gr HARD (429421 of linotype) cast bullets that were flat based and lubed with Javlina.  excellent accuracy with no leading.

Had abysmal performance with commercial "hard cast" bullets and the hard wax lubes they come with.  Severe leading in chamber throats, forcing cone and first inch or so of the barrel.  This can be alleviated by washing the wax lube off and relubing with Javlina or other alox lube.  Have found most commercial bullets are bevel base and they've never been as accurate as flat based bullets.  Best luck I've had with the 240 gr commercial bullets as bought has been when using 9.5 gr of Unique.  Generally runs between 1000 and 1100 fps and is a nice "fun" load.  Still leads, though not as bad as the full bore load.

Larry Gibson