Author Topic: Recoil pads for Handi's? (Read 602 times)

knight0334 · « **on:** February 16, 2006, 07:53:58 AM »

What do you guys use for recoil pads when you've replaced the factory units?

I'm getting close to the point where I need to find a pad or butt plate for my GunStocksInc wood. I cut the LOP to + 1/4" of the factory LOP on the laminates, thus requiring a slightly larger pad or plate.

I'm looking into grind-to-fit units, but haven't found one that tickles my fancy.

Suggestions??

Mac11700 · « **Reply #1 on:** February 16, 2006, 08:15:14 AM »

I like the Limbsaver grind to fit pads..I had GunStocks Inc..fit one to mine when they made my custom stocks..and I have them on the rest of my Handi's..If you want something different..see if the Morgan Adjustables plate will fit your stock..they have a shotgun pad and a curved target style that may interest you..

Mac

quickdtoo · « **Reply #2 on:** February 16, 2006, 08:43:59 AM »

Same here, Limbsaver grind to fit!! Midway has em on sale...

http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=118987

Plinkomatic · « **Reply #3 on:** February 16, 2006, 09:21:35 AM »

Slapped a Limbsaver pull-over on the back of my Survivor so I can still access the water-tight storage in the butt stock without making new holes. Works great.

Busta · « **Reply #4 on:** February 16, 2006, 03:14:19 PM »

Mac & Quick,

Is the hole spacing correct on that small LimbSaver pad for the H&R/NEF's?

Mac11700 · « **Reply #5 on:** February 16, 2006, 07:04:15 PM »

It's not perfectly aligned..and you'll need to fill 1 hole to get the pad perfectly square on the Handi stock..but..I am not sure on the GunStocks Inc. stock...I had them install it and grind it when I ordered mine from them..

Mac

quickdtoo · « **Reply #6 on:** February 16, 2006, 08:43:53 PM »

Seems to me I use one of the existing stock holes and drilled a new one for the other, which ever centers the pad so I can mark it for final grinding.

Tim

quickdtoo · « **Reply #7 on:** February 16, 2006, 08:51:01 PM »

Seems to me I use one of the existing stock holes and drill a new one for the other, which ever centers the pad so I can mark it for final grinding. Mine are on big bores, so I left the pads full for a bigger footprint, I only ground the mating surface and then tapered the pad sides a little to match.

Tim

This one is on my .405 Winchester...

http://img.photobucket.com/albums/v386/quickdtoo/405Win.jpg">

and the .45-70...

http://img.photobucket.com/albums/v386/quickdtoo/45-70.jpg">

Busta · « **Reply #8 on:** February 17, 2006, 03:04:07 AM »

Thanks Mac and Quick! :grin: It'd be nice if they made one to fit, but yours look really nice Quick.