Author Topic: load data 30.30 (Read 716 times)

mikedb · « **on:** March 31, 2006, 02:51:42 AM »

I am looking for load data using Trail Boss for a 170gr Laser Cast. IMR only lists a 160gr.

ron haralson · « **Reply #1 on:** March 31, 2006, 06:18:44 AM »

I'm using 14 gr h110 or 24gr wc845, both with very decent accuracy, although in a different rifle.

Good luck. Ron

Mikey · « **Reply #2 on:** April 05, 2006, 03:23:25 AM »

My older Lyman manual shows an accuarcy load using Unique, 10.6 grains under a 173 gn (with gas check) cast bullet (#311291) for 1568'/sec. HTH. Mikey.

Sixgun · « **Reply #3 on:** April 05, 2006, 04:09:12 AM »

12 gr of Unique will get you around 1550 fps. Accuracy should be good if you use a gas check.

A case full of IMR 4831, about 32 gr will be safe and get you around 1900 fps. You will have lots of unburned powder, but accuracy is really good. I have used a Lyman 311291 and a RCBS 30-180-FN with this load. I get under 4 inches at 200 yards. Again, use a gas check. I weigh my charges with 4831 but I have gone as low as 31 gr and as high as 34 gr. I get good velocity increases but there is always lots of unburned powder. I did win the Idaho Cowboy Rifle Silhouette Championships with this load, so it does work.

I use 28 gr of re7 with a Lee 170gr bullet in my 14 inch contender. This one is very accurate. I don't remember the velocity but it give one hole accuracy at 100 yards.

My disclammer is that I have never got a LC bullet to be as accurate as I get from my own cast bullets. If you find a load, using your LC Bullets, that gets exceptional accuracy, let us know.

Sixgun