Author Topic: best recoil pad  (Read 951 times)

0 Members and 1 Guest are viewing this topic.

Offline webrehm

  • Trade Count: (0)
  • Member
  • *
  • Posts: 23
best recoil pad
« on: February 25, 2006, 12:35:59 PM »
Pachmayer makes both 1.1" and 1.5" thick decelerator recoil pads.
Also there is the Limbsaver pad.
I would like opinions on which would be the absolute best pad for heavy 45-70 loads in an 1895 levergun.
tks

Dennis

Offline DAD

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 181
best recoil pad
« Reply #1 on: February 25, 2006, 02:29:17 PM »
Hope this helps. I put a Limbsaver on my 870 12ga. and with 23/4 rifled slugs and I can shoot about 20 in a row. Without any problem or sore or brused shoulder. When I get done its like I havent shot. Believe me I'm completely sold When it comes to recoil I'm extreamly sensitive.

Offline victorcharlie

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3573
best recoil pad
« Reply #2 on: February 26, 2006, 03:43:11 AM »
I've tried both pads.......I really like the limbsaver.
"Extremism in the defense of liberty is no vice. Tolerance in the face of tyranny is no virtue."
Barry Goldwater

Offline Jason

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 232
best recoil pad
« Reply #3 on: February 26, 2006, 05:44:32 AM »
A few years ago, I would have said Decelerator every time. After I bought my first Limbsaver pad, I've never bought another Decelerator. There's no contest between. The Limbsaver is much better.

Offline hunting1

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
best recoil pad
« Reply #4 on: February 26, 2006, 05:28:14 PM »
All my rifles wear a pre-fit deccelerator. Best money you can spend in my opinion.
Good shoot'n

Offline slik r slik

  • Trade Count: (0)
  • Member
  • *
  • Posts: 14
Recoil pads
« Reply #5 on: February 26, 2006, 08:52:50 PM »
I prefer the Limbsavers to the Decelerators I use them on my 444p, 45/70(which also has a mercury recoil reducer), my35ltdss, and my 1894 41ltdss.  They were easy enough to install using a BSquare jig bought from Brownells. Just follow the instructions, go slow and you can do it.  Around here they get about $100-120 to install, so if you have other rifles that need one the cost of the jig is well worth it.

Offline JD338

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 158
best recoil pad
« Reply #6 on: February 28, 2006, 01:35:20 PM »
I put a Pachmyer Decelerator pad on my M700 338 RUM. Went from being sore for days firing 15 roounds to 20-25 rounds from bench, sitting and prone with no ill effects. It made that much difference!

JD338

Offline Bubba w/a 45/70

  • Trade Count: (0)
  • Member
  • *
  • Posts: 81
best recoil pad
« Reply #7 on: March 07, 2006, 06:05:47 PM »
I have a Decellerator on one 1895 and a Limbsaver on the other 1895; both in 45/70.  

There is mucho difference between the two.  The Limbsaver wins hands down for recoil reduction.

I also use a slip on Limbsaver on my Trapdoor for competition, and it allows me to shoot 100 rounds a day  through that rifle without worrying about fatigue or pain.  They work.  Period.


The only big (physical) difference is in the thickness of the two pads.  The Limbsaver will add a bit to your stock length, so if you are sensitive to the length of your stock, then shortening is called for when using the Limbsaver.
"I SHOOT BACK!"     Uncle Ted