Author Topic: 22-250 rounds using Varget Powder pushing a 53 gr Barne TSX  (Read 659 times)

0 Members and 1 Guest are viewing this topic.

Offline Bluegunner

  • Trade Count: (1)
  • Member
  • *
  • Posts: 63
22-250 rounds using Varget Powder pushing a 53 gr Barne TSX
« on: March 28, 2006, 01:20:23 PM »
Has anybody used this powder in their .22-250?  How does it differ from H380 and Vise Versa.  I am just working up some experimental rounds and wondered if someone here has already worked with this powder.

Offline kenscot

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 372
22-250 rounds using Varget Powder pushing a
« Reply #1 on: March 28, 2006, 05:15:50 PM »
I am using 37 grs. of varget with 50 grain nosler ballistic tips and getting groups consistently under a 1/2 inch

Offline Grumulkin

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 2028
    • http://www.orchardphoto.com
22-250 rounds using Varget Powder pushing a
« Reply #2 on: March 29, 2006, 02:33:17 AM »
Just yesterday I loaded up some 22-250s with 53 grain Barnes TSXs and 35 grains of Varget to test.  Today off the bench I got about 2 MOA out of them which I think is pretty lousy.

I also loaded some 53 grain Sierra flat based hollow point match bullets over 34 grains of Varget and got a 5 shot 100 yd. group of about 0.5 MOA.  I'm going to try some Triple Shocks with 34 grains of Varget and see if they do any better but thus far I'm not impressed with them from the accuracy standpoint.  My gun, with the 53 grain bullets seems to prefer a charge of about 34 grains of Varget though with weights up to 36 grains, there has been no sign of excessive pressure.

Barnes says the gun barrel needs to be very clean to get optimal accuracy out of their bullets.  My gun barrel hasn't been cleaned for about 50 shots at least.  If a bullet requires frequent cleaning of the barrel to shoot well, it's just too fussy for me when other choices are available.