Author Topic: Help to a newshooter  (Read 552 times)

0 Members and 1 Guest are viewing this topic.

Offline gufote

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
Help to a newshooter
« on: April 03, 2006, 03:30:38 AM »
Did any body try to shoot a pacht and maxi bullet instead of plastic sabot in an inliner ml?

Offline toytruck

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 240
Re: Help to a newshooter
« Reply #1 on: April 03, 2006, 05:57:52 AM »
Quote from: gufote
Did any body try to shoot a pacht and maxi bullet instead of plastic sabot in an inliner ml?


I assume you are talking about a .45 maxiball in a .50 barrel? No, I haven't tried it that way. It can be done though, same thing as paper patched bullets.
I have used wads under the bullet to increase accuracy.  If you use bore size conicals, in the same bore size barrel, you won't need to use a patch or sabot!
Whites & TC Renegade


Life may change us, but we start and end with family.

Offline AndyHass

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 629
Help to a newshooter
« Reply #2 on: April 03, 2006, 08:43:06 AM »
My guess, and this is only a guess, is that accuracy would be very poor.  A RB only contacts the bore near the "equator", so the patch does a good job of supporting it.  Additionally, the rifling is very slow.

A maxi, on the other hand, contacts the bore for .5"-.75" give or take.  A patch would not support the bullet along its entire length, allowing it to likely tilt in the bore.  Additionally, the rifling is more agressive and the patch might not grip the bullet enough to spin it, or might not hold up to the increased angular force created by the more aggressive rifling.

A sabot has petals to support the bullet uniformly for its whole length.  Without this, I don't see accuracy being good.

Go ahead and prove me wrong though  :D

Offline toytruck

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 240
Help to a newshooter
« Reply #3 on: April 03, 2006, 09:27:38 AM »
I will have to agree with Andy!  Good point and good post by the way! 8)
Whites & TC Renegade


Life may change us, but we start and end with family.

Offline Adkhunter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 35
Help to a newshooter
« Reply #4 on: April 03, 2006, 12:14:23 PM »
It makes no sence to me.

Offline gufote

  • Trade Count: (0)
  • Member
  • *
  • Posts: 8
Help to a newshooter
« Reply #5 on: April 03, 2006, 08:38:40 PM »
Thank you very much for your replays.
It helps a lot, sorry for my poor explanation of the question.
I was talkin about .44 calibre in a .50.
Adkhunter, yes it looks like a no sense, but the problem actually is that i run off sabots, and since I run my own .44 bullets, the only thing that I need are sabots, but in my area they only sell sabots + bullets asking me something about 19 bucks for a packet of 20.
So for the moment I will have to figure out something to replace the plastic sabots.
 :cry:

Offline Critter

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 367
Help to a newshooter
« Reply #6 on: April 04, 2006, 02:51:57 AM »
Just order some sabots: http://www.mmpsabots.com/

Offline Adkhunter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 35
Help to a newshooter
« Reply #7 on: April 04, 2006, 01:31:58 PM »
Quote from: gufote

Adkhunter, yes it looks like a no sense, but the problem actually is that i run off sabots, and since I run my own .44 bullets, the only thing that I need are sabots, but in my area they only sell sabots + bullets asking me something about 19 bucks for a packet of 20.

 :cry:


I understand now. Sorry about the comment then.
If you only need to buy sabots you can always order them online.
I have yet to but I will be doing it shortly.

Offline Adkhunter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 35
Help to a newshooter
« Reply #8 on: April 04, 2006, 01:33:16 PM »
I ought to look up one post. Critter said it best with a good link.