Author Topic: 44 mag  (Read 1286 times)

0 Members and 1 Guest are viewing this topic.

Offline bigshooz

  • Trade Count: (0)
  • Member
  • *
  • Posts: 69
44 mag
« on: April 06, 2006, 08:23:21 AM »
Hi Veral i'm very interested in casting my own bullets.I have lots and lots of questions, thats why they write books. What i would like to know from you is what bullet weight is optimal for my handi, it has a 1- 38 twist and i've been told 270 gr is the limit for this rate.I would like to shoot 300+ gr lead , is this possible in this barrel , also which weight is best for my 357 handi , it's 1-18.75 twist could i shoot 180 - 200 gr?Thanks Mike :?
slide it where it fits jam it where it doesnt  :wink:   [/quote]

Offline Veral

  • GBO Sponsor
  • Moderator
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1675
    • Lead Bullet Technology
Re: 44 mag
« Reply #1 on: July 09, 2006, 06:42:16 AM »
  I suggest that all bullet casters read my book, Jacketed Performance with Cast bullets.  Also go over this forum throughly, even if the question doesn't seem important to you, as I make my answers as broadly informative as possible, to cover as many factors as possible which may be important to all readers, not just the questioner.
  Bullet weight can go WAY over what most reccomendations, or the greenhil formula allows, IF THE BULLETS ARE BALANCED WHEN THEY LEAVE THE BARREL!  You'll pick up all that in reading the above information.

  In the 44, a 280 or 300 gr LFN would be good choices, and in the 357, 180 or 200 gr FN.  Speeds are high in rifle length barrels with full magnum powder loads, so if bullets are fitted properly, these weights will fly very accurate.  Email me if you would like more specific information, like low velocity, speical game uses etc.
    LBTisAccuracy@Imbris.net
Veral Smith