« previous next »
Pages: [1]   Go Down

Author Topic: Schematics on the H&R SB2 frames  (Read 1657 times)

0 Members and 1 Guest are viewing this topic.

Offline rms4570hr

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 135
  • Gender: Male
Schematics on the H&R SB2 frames
« on: June 30, 2006, 02:05:26 PM »
Are the any schematic drawings around showing the break down on a H&R SB2 frame?




rms270hr
Logged
You know handi rifles are like lays potato chip's with the chip's you can't eat just one same with the handi rifle's you can't buy just one.

rms270hr

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Schematics on the H&R SB2 frames
« Reply #1 on: June 30, 2006, 08:28:48 PM »
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline rms4570hr

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 135
  • Gender: Male
Schematics on the H&R SB2 frames
« Reply #2 on: June 30, 2006, 11:32:09 PM »
Thank's tim this will help in case i have to go into the receiver.i hate going into something blind :-D



rms270hr
Logged
You know handi rifles are like lays potato chip's with the chip's you can't eat just one same with the handi rifle's you can't buy just one.

rms270hr

Offline Paul5388

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 888
  • Gender: Male
Schematics on the H&R SB2 frames
« Reply #3 on: July 01, 2006, 02:24:52 AM »
Tim,

Nothing wrong with the schematic, but if parts were ordered, there may be a different profile on the Pardner hammer.  I think BigBlue ordered some and they were different than the SB2 hammer.
Logged

Offline rms4570hr

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 135
  • Gender: Male
Schematics on the H&R SB2 frames
« Reply #4 on: July 01, 2006, 03:06:44 AM »
Yeah i just need the schematic as something to go by as to where all the parts are located in the receiver when it comes time to put it back together :)



rms270hr
Logged
You know handi rifles are like lays potato chip's with the chip's you can't eat just one same with the handi rifle's you can't buy just one.

rms270hr

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Schematics on the H&R SB2 frames
« Reply #5 on: July 01, 2006, 04:38:08 AM »
Probably the best tutorial for working on the trigger/hammer group is Perklo's 2 part .pdf in the FAQ.

Tim

www.perkloafm.com
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »