« previous next »
Pages: [1]   Go Down

Author Topic: 44 cal. barrel blanks !  (Read 730 times)

0 Members and 1 Guest are viewing this topic.

Offline myarmor

  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 3239
  • Gender: Male
44 cal. barrel blanks !
« on: July 25, 2006, 07:38:46 AM »
Over at the Sportsmansguide, cheap too.
http://www.sportsmansguide.com/cb/cb.asp?a=282644
Good time for those looking for a new project ;D
I wonder where they came from? I thought H&R/NEF wouldn't sell them outright due to legalities ??? Hope we see more in the future 8)
-Aaron
Logged

Offline Busta

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 2586
  • Gender: Male
Re: 44 cal. barrel blanks !
« Reply #1 on: July 25, 2006, 12:09:00 PM »
How many lands & grooves do the standard .44 barrels have. Looks like these are Marlin micro groove barrels (says 12 groove). Then you have to get a barrel lug, turn barrel, ream the chamber, add forend lug, extractor/ejector, tap for scope base and/or sights and re-blue.

I would say, ordering a barrel fitted to you receiver would be a bargain when compared to this  blank, unless you aren't looking to put in on a Handi.

I'm betting these barrels didn't perform and that is why they unloaded them. Just doesn't sound like the H&R I know.
Logged
U.S.A.F. Veteran
NRA Life Member

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: 44 cal. barrel blanks !
« Reply #2 on: July 25, 2006, 12:15:47 PM »
My bet is that these were made for H&R and did not meet specs and the manufacturer is just trying to unloading them any way they can . 

stimpy
Logged
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline SwedeNelson

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
Re: 44 cal. barrel blanks !
« Reply #3 on: July 25, 2006, 05:01:38 PM »
"Factory original round Blanks with a 13/16" outside diam. and 23 1/2" length"

If it is 13/16" out side it is not a H&R blank - Has to be about 1 1/8".
Gunparts had some at one time also.

Swede Nelson
Logged
Pages: [1]   Go Up
« previous next »