« previous next »
Pages: [1]   Go Down

Author Topic: Getting a .32 barrel for CHRISTmas.........  (Read 1028 times)

0 Members and 1 Guest are viewing this topic.

Offline KING

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 632
Getting a .32 barrel for CHRISTmas.........
« on: December 14, 2002, 05:16:45 PM »
:D That nickle size patch is right on the button fer that little .32  But they dont have to be round,u can cut em sauare also,and it takes less time.  Which..inturn leaves ya more time to shoot 8)
Logged
THE ONLY FEMALE THAT I TRUST IS A LABRADOR.......AND SHE DONT SNOORE,AND DONT COMPLAIN ABOUT MY COOKING...THE ONLY GODS THAT EXIST ARE THOSE THAT HAVE ONE IN THE CHAMBER,AND 19 IN THE MAG.......

Offline kevin

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 144
.32 patches
« Reply #1 on: December 14, 2002, 06:48:04 PM »
:D  try this use only cloth as in cotton or linnen don't use a bed sheet expecily the wifes new one (believe me i found out the lard way and i cost me a brand new set of silk sheet s. that definately hurt my pocket book, i got busted in the act by the  wifey.
         any way cut into squares about an inch long and wide drop powder down and place patch on muzzle and place ball on patch and run it down just enough to get the ball started in muzzle and take knife and cut off excess, then continue to run ball and patch home. woks good.
          i've used .308 diam. round balls and .310"s, and .315's all work well but the .315" and a .15 linnen patch seams to be the best in my green mountain 36" lancaster builtby myself.
                                           kevin
Logged
TOS violation warning given 4-2-05 Account deactivated 4-5-05. E-mail GB to get reinstated.

Offline Muldoon

  • Trade Count: (0)
  • Posts: 4
Getting a .32 barrel for CHRISTmas.........
« Reply #2 on: April 16, 2003, 05:13:47 AM »
Why not cut them in the traditional way, as you load. They all fit perfectly every shot.
Logged

Offline River runner

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 188
Getting a .32 barrel for CHRISTmas.........
« Reply #3 on: April 16, 2003, 05:44:01 AM »
I cut my patch material in 1" strips, after I impregnate them with water and water soluble oil (Dutch Shultz method) let them dry so just the oil is in the weave, store 'em in 35mm film canisters all rolled up nice and neat, then place over the bore, just start the ball into the end of the muzzle flush like, and use a sharp flat bladed knife and cut excess patch, stays consistent each time and the ball is equally surrounded by the patch. River runner :D
Logged

Offline Grump

  • Trade Count: (0)
  • Member
  • *
  • Posts: 84
Getting a .32 barrel for CHRISTmas.........
« Reply #4 on: April 17, 2003, 01:37:00 PM »
Me too River runner.Give great accuracy with my .32. :bye:
Logged

Offline mamaflinter

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 166
    • http://mamaflinter.tripod.com
Re: Getting a .32 barrel for CHRISTmas.........
« Reply #5 on: April 19, 2003, 12:00:48 PM »
Quote from: Floomrider
Wondering how big I need to cut the patches to shoot round ball in this thing?...I thought about buying patches, but I have plenty of material to make my own.



The .32 and the .36 both utilize the same size patch which is 7/8". You can make a patch cutter by purchasing a hole saw drill bit. Now the only thing is with patches, you measure the outside diameter. With hole saw bits you measure the inside diameter. Hubby made one by purchasing a 1 inch drill bit. You then grind off all the teeth and beveled one edge to be able to sharpen. Keep it cool by quenching in water. After he did this, he threaded a bolt into the threads at the top and cut the bolt head off. He then turned down a "wooden ball" on his wood lathe and attached it to the bolt for a handle. He cuts out hundreds of patches at one sitting in various calibers.

Hope this helps.
Logged
Pages: [1]   Go Up
« previous next »