« previous next »
Pages: [1]   Go Down

Author Topic: T/C Encore  (Read 1455 times)

0 Members and 2 Guests are viewing this topic.

Offline all4abuck

  • Trade Count: (0)
  • Member
  • *
  • Posts: 71
  • Gender: Male
T/C Encore
« on: July 25, 2006, 04:09:11 PM »
What would be a good price for a T/C Encore 209x50 in stainless, with thumbhole laminate stuck?  Does barrel length matter? 26" or 28"?

Just looking to pick up a new muzzle loader to replace my old FireHawk and be a little easier to clean.  With the capability to switch barrels and forearm to make a rifle or pistol, and being made in America, Encore seems to be the right choice.  But at what price?  Over or below $600?
Logged
Blessed be the Lord my strength, which teacheth my hands to war, and my fingers to fight. My goodness, and my fortress; my high tower, and my deliverer; my shield, and he in whom I trust;

Offline Encore28

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 332
Re: T/C Encore
« Reply #1 on: July 25, 2006, 04:36:12 PM »
All4abuck
You should be able to get yourself an Encore 209x50(not the Prohunter) under $500. When I started my addiction to Encores a few years back I bought my frame with stock and forend for under $250(blued and brand new) then I bought a 209x50 barrel from Eabco.com for under $225(also blued and brand new). From there my addiction grew and need to buy something Encore related quite often!!!
Good luck
Encore28
Logged
T/C---One Perfect Shot

TCA Member

Offline all4abuck

  • Trade Count: (0)
  • Member
  • *
  • Posts: 71
  • Gender: Male
Re: T/C Encore
« Reply #2 on: July 25, 2006, 04:43:53 PM »
Has anyone tried the ProHunter?  What are the advantages over a regular Encore?  Is 28" barrel worth it in terms of velocity and accuracy?  Also, any info on the 209x45 supper magnum in comparison to 209x50?
Logged
Blessed be the Lord my strength, which teacheth my hands to war, and my fingers to fight. My goodness, and my fortress; my high tower, and my deliverer; my shield, and he in whom I trust;

Offline kudzu

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 590
  • (Dancoman)
Re: T/C Encore
« Reply #3 on: August 07, 2006, 04:06:29 PM »
Savage MLII Camo SS around 525.00
Logged

Offline poncaguy

  • GBO Supporter
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2751
  • Gender: Male
Re: T/C Encore
« Reply #4 on: August 07, 2006, 04:36:09 PM »
My Encore has a 26" barrel, my Omega a 28" barrel, I don't notice much difference. I use 3 777 pellets or 120 grains of FFG American Pioneer, 348 grain Powerbelts. Going to try the new Platinum 338 grain Powerbelts this year..........
Logged

Offline doegirl

  • Trade Count: (0)
  • Member
  • *
  • Posts: 38
Re: T/C Encore
« Reply #5 on: August 07, 2006, 05:58:42 PM »
Quote from: all4abuck on July 25, 2006, 04:09:11 PM
What would be a good price for a T/C Encore 209x50 in stainless, with thumbhole laminate stuck?  Does barrel length matter? 26" or 28"?

Just looking to pick up a new muzzle loader to replace my old FireHawk and be a little easier to clean.  With the capability to switch barrels and forearm to make a rifle or pistol, and being made in America, Encore seems to be the right choice.  But at what price?  Over or below $600?

My gun set me back $700.00  The synthetic stock, stainless about $600.  Synthetic stock, blued steel $550.  These are Ohio prices.
Logged

Offline GRIMJIM

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 3002
  • Gender: Male
Re: T/C Encore
« Reply #6 on: August 15, 2006, 02:03:55 PM »
paid just under 700 for mine, pro hunter is going for 729, in the chicagoland area. I like the fibre optic sights, don't know if Im going to scope it or not, also did the 25 acp conversion.
Logged
GBO SENIOR MEMBER "IF THAT BALL COMES IN MY YARD I'M KEEPING IT!"

NRA LIFE MEMBER

UNION STEWARD CARPENTERS LOCAL 1027

IF GOD DIDN'T WANT US TO EAT ANIMALS, WHY DID HE MAKE THEM OUT OF MEAT?

Offline all4abuck

  • Trade Count: (0)
  • Member
  • *
  • Posts: 71
  • Gender: Male
Re: T/C Encore
« Reply #7 on: August 25, 2006, 05:32:58 PM »
Is the Pro-Hunter worth the extra?  Trying to make a decision between the Encore with laminate thumbhole stock or the ProHunter with composite hardwoods stock, both in stainless.
Logged
Blessed be the Lord my strength, which teacheth my hands to war, and my fingers to fight. My goodness, and my fortress; my high tower, and my deliverer; my shield, and he in whom I trust;

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: T/C Encore
« Reply #8 on: August 26, 2006, 01:59:32 AM »
Quote from: all4abuck on August 25, 2006, 05:32:58 PM
Is the Pro-Hunter worth the extra?  Trying to make a decision between the Encore with laminate thumbhole stock or the ProHunter with composite hardwoods stock, both in stainless.

I would have to say yes the Pro-Hunter is worth it, I have a standard thumb hole stock Encore and the Pro-hunter, both 50 Cal M/L's and I will take the Pro-Hunter over the Standard Encore any day. Although I still will keep both.  ;D
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline all4abuck

  • Trade Count: (0)
  • Member
  • *
  • Posts: 71
  • Gender: Male
Re: T/C Encore
« Reply #9 on: August 26, 2006, 05:54:30 AM »
Red Hawk,

Would would you say the primary advantages are?  Besides the FlexTech stock.  Any increased performance in down range accuracy?
Logged
Blessed be the Lord my strength, which teacheth my hands to war, and my fingers to fight. My goodness, and my fortress; my high tower, and my deliverer; my shield, and he in whom I trust;

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: T/C Encore
« Reply #10 on: August 26, 2006, 07:36:42 AM »
Quote from: all4abuck on August 26, 2006, 05:54:30 AM
Red Hawk,

Would would you say the primary advantages are?  Besides the FlexTech stock.  Any increased performance in down range accuracy?

I like the quick removing breech plug, the swing hammer, and the longer barrel. As far as accuracy, both of my Encores are tack drivers. But I go shoot my Pro-hunter at 200 yards with better accuracy. But I attribute that to the scope and powder charge and sabot selection. Also the over all appearance of the Pro-hunter is appealing to me.
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline Biff Mayhem

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 223
  • Gender: Male
Re: T/C Encore
« Reply #11 on: August 26, 2006, 09:47:14 AM »
Quote from: all4abuck on August 25, 2006, 05:32:58 PM
Is the Pro-Hunter worth the extra?  Trying to make a decision between the Encore with laminate thumbhole stock or the ProHunter with composite hardwoods stock, both in stainless.

Laminate Thumbhole..... but shoulder it a few times first. I almost purchased a thumbhole a few weeks ago online -- now I'm glad I didn't. Last week I shouldered one for the first time. I just could not get comfortable with it. Fat & skinny in all the wrong places for me.  I was disappointed in the end - because I really like the way they look - also like the variety of colored stocks being offered. :)
Logged
Keep that ML smokin'
Dave

Offline GRIMJIM

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 3002
  • Gender: Male
Re: T/C Encore
« Reply #12 on: August 27, 2006, 11:44:03 AM »

Laminate Thumbhole..... but shoulder it a few times first. I almost purchased a thumbhole a few weeks ago online -- now I'm glad I didn't. Last week I shouldered one for the first time. I just could not get comfortable with it. Fat & skinny in all the wrong places for me.  I was disappointed in the end - because I really like the way they look - also like the variety of colored stocks being offered. :)
Quote

I agree, shoulder it first. It was the opposite for me though, it felt completely natural.
Logged
GBO SENIOR MEMBER "IF THAT BALL COMES IN MY YARD I'M KEEPING IT!"

NRA LIFE MEMBER

UNION STEWARD CARPENTERS LOCAL 1027

IF GOD DIDN'T WANT US TO EAT ANIMALS, WHY DID HE MAKE THEM OUT OF MEAT?
Pages: [1]   Go Up
« previous next »