Author Topic: Field test on a Falcon  (Read 547 times)

0 Members and 1 Guest are viewing this topic.

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Field test on a Falcon
« on: September 03, 2006, 01:24:08 AM »
About 20 years ago my friend and I would go down to the Northern California coast to his uncle’s ranch and hunt wild pigs.  These trips always entailed large quantities of a guns and ammunition and of course cannons and mortars.

One trip down my friend’s uncle called us over to an overgrown logging landing where he had pulled a 1964 Ford Falcon out of the bush.  He wanted us to shoot it with the cannon.

The cannon is a replica of a boat howitzer recovered from the U.S. Cairo. It has a one inch bore,



Back in those days I didn’t have a copy of Switlik’s book and simply followed the Guidelines publish in The Muzzle Loading Artilleryman for determining loads; 2 oz. per inch of bore.  Overlooked was that this was a maximum load using Cannon Grade and not things you could buy in the gunshop like FFG.  Also not considered was my projectile was a HB wadcutter weighing 8 oz and made of lead.

Here’s that slug next to a 577/450 Martini and a 17 HMR case.



The car was pulled out of the brush with a cat and placed at one end of the landing in front of the cut bank.  The cannon was loaded up and fired.  Back then I tied the cannon down with a set of block and tackle to keep it from flying over backwards.



Here’s the shot! You can see how much the gun recoiled, by looking at where the gun is in relationship to the plume from the vent.  Since changing to 1 inch round ball I don’t have this problem.  The ball only weighs 3 ozs. and I only use 185 grs. Of CG. Sure glad I used 4140 for the gun barrel.

You can see the one inch hole in the door. While we are all standing around admiring the big hole in the door we heard a sound. We looked up and behind the car a tree crashed to the ground.   These pictures are old 35 mm chemical photos so you can’t see the details as clearly as you would in a digital photo. With the better detail you would see through the hole, the trees behind the car in front of the cut bank.  Also what you would see is the stump of the 3 or 4 inch Alder tree that the slug passed through.  The hole was big enough to topple the 25 foot tree.

Of course we had to take a shot at the engine block.  The frame stopped the slug before it hit the block and we were out of ammo.  Boy I wish he had called use to shoot the car sooner!!!

This is the same trip that I broke the frame on my tin can mortar, but that is another story for another day.


Offline reddog

  • Trade Count: (0)
  • Member
  • *
  • Posts: 87
Re: Field test on a Falcon
« Reply #1 on: September 03, 2006, 02:32:39 AM »
Cool pics DD. I use 170 grains of fg in my one inch bore and let me say that one inch ball can do some damage!!! I have'nt shot at A car door yet, mostly wood targets and it tears em up!
"Catch A cannonball, now take me down the line. My bag is sinkin' low and I do believe it's time."

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Field test on a Falcon
« Reply #2 on: September 03, 2006, 05:30:12 AM »
Now that the fellows over here in South Africa have taught me how aim a cannon with out sights, I wish I had my cannon with me.

I go home on R&R next spring and I guess I could bring it back with me.  I can just see me checking my cannon in with the airlines. Hi, need to check  my cannoin in"   Every sniffer dog in the airport would go crazy.

Offline EL Caz 66

  • GBO Supporter
  • Trade Count: (1)
  • A Real Regular
  • *****
  • Posts: 799
  • Gender: Male
  • Man the guns !!
Re: Field test on a Falcon
« Reply #3 on: September 03, 2006, 06:10:06 AM »
DD,

I would check it in as a museum qaulity replica for educational purposes  ;) :D I sure that would work...

Ed