Author Topic: I need the load Data for sierra 100gr. bullet  (Read 339 times)

0 Members and 3 Guests are viewing this topic.

Offline hylander

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 360
  • Gender: Male
I need the load Data for sierra 100gr. bullet
« on: September 08, 2006, 01:23:14 PM »
Any have Sierra's load data for the .243 with the 100gr. SBT
with IMR 4064.
Minimum and Maximum load.
Failure is not an option
Placer County, Calif.

Offline Jasper243

  • Trade Count: (0)
  • Member
  • *
  • Posts: 32
Re: I need the load Data for sierra 100gr. bullet
« Reply #1 on: September 08, 2006, 02:39:50 PM »
Hylander-

My Sierra manual is 20 plus years old, but lists the 100 grain bullet as follows:

Start - 31 grains of IMR 4064

Max - 36 grains of IMR 4064

My gun likes a moderate load of Winchester 760 and a 100 grain bullet.  3/10 of an inch at 100 yds, Remington Model 700 right out of the box!

Hope this helps

Jasper243

Offline Val

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 846
Re: I need the load Data for sierra 100gr. bullet
« Reply #2 on: September 08, 2006, 04:29:21 PM »
I've got the 5th edition. It lists a min of 30.7 grains and a max of 36.2 grains.
Hunting and fishing are not matters of life or death. They are much more important than that.

Offline hylander

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 360
  • Gender: Male
Re: I need the load Data for sierra 100gr. bullet
« Reply #3 on: September 08, 2006, 07:15:32 PM »
Thanks Guy's  ;)
I'll get to reloading in the Morning
Failure is not an option
Placer County, Calif.