« previous next »
Pages: [1]   Go Down

Author Topic: .22 Versa Pack and sticking brass  (Read 626 times)

0 Members and 1 Guest are viewing this topic.

Offline HUNTS

  • Trade Count: (0)
  • Member
  • *
  • Posts: 25
.22 Versa Pack and sticking brass
« on: October 05, 2006, 05:26:11 PM »
I searched the forum but couldn't find a posting about this.  Our .22 Youth Versa-Pack will shoot about 20 rounds before the brass starts to fail to eject.  It's really a pain to have to knock them out with a cleaning rod.  Any suggestions?  Polish the bore? How?

Thanks in advance,

Steve
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: .22 Versa Pack and sticking brass
« Reply #1 on: October 05, 2006, 05:52:35 PM »
Polish the chamber then clean the ejector housing and ejector if the chamber polish doesn't help. If you R&R the ejector, polish the ejector claw and housing, put a BB behind the ejector spring to increase tension before you reassemble it. Ejector mod info can be found in the FAQ and Help sticky.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline ironglow

  • GBO Supporter
  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 31293
  • Gender: Male
Re: .22 Versa Pack and sticking brass
« Reply #2 on: October 06, 2006, 05:11:26 AM »

   I found on my new versa pack, that the milling of the ejector doesn't match exactly with the chamber face.
  No sticking of spent cases yet..but a slight bulge where the ejector doesn't match perfectly..may want to check that..
Logged
If you don't want the truth, don't ask me.  If you want something sugar coated...go eat a donut !  (anon)
Pages: [1]   Go Up
« previous next »