« previous next »
Pages: [1]   Go Down

Author Topic: for those who reload 38-55 for the Target Model  (Read 400 times)

0 Members and 1 Guest are viewing this topic.

Offline spinafish

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 1161
  • Gender: Male
for those who reload 38-55 for the Target Model
« on: January 29, 2008, 04:03:37 PM »
what dies are you guys using?  I normally use Lee dies..but after have read the reviews on Midway's site..it seems the Lee are set up for .375 diameter bullets and I will be loading .379 diameter bullets?  Seems the favorite is the RCBS Cowboy dies..
Logged
the most heartwreching words any man will ever hear
"depart from me, I never knew you"  Jesus
We may ignore, but we can nowhere evade the presence of God. The world is crowded with Him. He walks everywhere incognito.” C.S. Lewis

Offline coyotejoe

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 2937
  • Gender: Male
Re: for those who reload 38-55 for the Target Model
« Reply #1 on: January 30, 2008, 04:56:13 AM »
The issue with these rifles is the chamber specs, some chambers are too tight to accept a round with a .379" bullet, even though the bore may be .379-.380". I used Lyman dies with mine and the Lyman "M" die will open the case neck to allow seating of .379" bullets and perhaps even larger although .379" is the largest I ever tried. My chamber accepted .379" bullets with no problem but I doubt it would take .380" and others have had problems with .379s.
Logged
The story of David & Goliath only demonstrates the superiority of ballistic projectiles over hand weapons, poor old Goliath never had a chance.

Offline Smokin Joe

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 1230
Re: for those who reload 38-55 for the Target Model
« Reply #2 on: January 30, 2008, 10:53:10 AM »
4-D Reamers has one that will fix this problem. It's a .400 neck .38-55 reamer. $28.00 rental




http://4-dproducts.com/
Logged
Deo duce, ferro comitante
With God as my leader and my sword as my companion

Offline jjamna

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 114
Re: for those who reload 38-55 for the Target Model
« Reply #3 on: January 30, 2008, 05:19:03 PM »
I also looked at the reviews at Midway so I got The RCBS Cowboy Dies. I have had good luck with them. My bore is .381 so I think I would have trouble with the Lee dies. I had to Lapp my mold from.379 to .381. but it was worth it. 250 gr bullet with9.5 gr Unique. got me 1 1/4 group at 100 yds 
Logged
Pages: [1]   Go Up
« previous next »