Author Topic: Cable restraints  (Read 492 times)

0 Members and 2 Guests are viewing this topic.

Offline horsepower

  • Trade Count: (0)
  • Member
  • *
  • Posts: 86
Cable restraints
« on: November 01, 2006, 02:51:05 PM »
Missouri has finally allowed snares but they don't call them snares but rather cable restraints.  You have to take a special class and then buy a cable restraint permit.  I've never trapped much of anything other than setting out some legholds where things were getting into the chickens.  I'd like to try this out.  Anyone have any insights for a rank newbie that don't know nothing, aside from finding a mentor which I am working on.

Offline four coil

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 200
Re: Cable restraints
« Reply #1 on: November 02, 2006, 12:18:19 PM »
Last year was my first year trapping. I used cable restraints and caught 3 greys and 3 coyotes. Location, location, location, To me this is one of the most important thing to consider. Next thing is anchoring. Last year we had a season where the ground would freeze then thaw. When the ground was frozen I would use a 1/2" by 20" steel stake with a nut welded on the top. Make sure when to leave a little bit of rod above the nut so when you drive it into the ground you don't deform the nut. Now slide your restraint on the stake. Then you slide a support on the stake made out of #9 wire. Drive the stake into the frozen ground. As the stake is being driven into the ground the friction will melt the ground ever so much. After it will refreeze in and thats all you will need to have to hold even the biggest coyote. To remove stake take a socket wrench and turn the stake by the nut. As you turn the stake, the friction will thaw the ground around the stake and it will come easily. You have to keep an eye on the weather. If it warms up you might loose your anchor. If the ground is not froze I still use the stake, but only to hold the wire support. Then I use an earth anchor to  hold the restraint. I hope this helps. Good luck.