Author Topic: 12GA from Hell  (Read 721 times)

0 Members and 1 Guest are viewing this topic.

Offline Donaldo

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 576
12GA from Hell
« on: October 26, 2006, 06:22:10 AM »
Hey guys, I'm back.  Been bit by the Benchrest bug.  Take a look at Benchrestdotcom, look under the General Discussion forum and then look at the thread "12GA from Hell".  One of the rifles he is using is a NEF.  Quick, this might be one you need to go with your collection of big bores.  Don
Luke 11:21

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Re: 12GA from Hell
« Reply #1 on: October 26, 2006, 06:30:30 AM »
Hey guys, I'm back.  Been bit by the Benchrest bug.  Take a look at Benchrestdotcom, look under the General Discussion forum and then look at the thread "12GA from Hell".  One of the rifles he is using is a NEF.  Quick, this might be one you need to go with your collection of big bores.  Don

It's already being posted about here at GBO...http://www.graybeardoutdoors.com/smf/index.php/topic,79991.0.html

Mac
You can cry me a river... but...build me a bridge and then get over it...

Offline knight0334

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 1138
  • Gender: Male
    • Pennsylvania Firearm Owners
Re: 12GA from Hell
« Reply #2 on: October 26, 2006, 06:38:29 AM »
some people are nuts!!

I couldn't imagine firing one of those 12FH's off...   heck, Ruger #1 loads in my Handi are bad enuff.
RIP ~ Teeny: b.10/27/66 - d.07/03/07

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 12GA from Hell
« Reply #3 on: October 26, 2006, 08:29:36 AM »
Don,

Ed has posted here on the NEF shotgun forum on it also, have been swapping PMs about 85% load density smokeless loads for the .45-120 BC, he's impressed with the NEF/H&R to say the least, his USH tests are impressive!! :o

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Donaldo

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 576
Re: 12GA from Hell
« Reply #4 on: October 30, 2006, 06:45:16 PM »
Tim, Mac,.....
Well it has been a while since I visited this site, so am not up to date.  Kind of an awsome project to say the least.  I have been bitten by the BR accuracy bug.  Started out when I bought a Savage rifle in 243 that shot better than anything I had.  Then I had to go and get a pacnor 6BR barrel to fit it.  Boy, does it shoot.  Now I have the full race benchrest rifle.  Viper action, Kreirger barrel, McMillian stock, Jewell trigger, Weaver 36x scope, yada, yada on the equipment to support it.  Got the rifle this summer and have only had time for about 250-300 rounds thru it.  So far, the best 5 shot group measured 0.105.  Had two other groups 0.2 grain under and above this load that went .154 and .160.  Now I have gotten so used to small groups that the rifles I have definately will shoot better than I can hold them.  To shoot consistent good groups you need to be able to read the wind.  A long and steep learning curve for me.....at my age.  But it is a hoot.  Next spring I will start shooting in some regional matches, God willing.  I have to drive about 120 miles to each range.  I have been to both as a "spectator" and caught the bug.  Now any group of five shots over 0.250 is a total train wreck.  Funny how things change.  Guess I will give my favorite handi to my oldest grandson....Don 
Luke 11:21