« previous next »
Pages: [1]   Go Down

Author Topic: Newbie..got a ?  (Read 413 times)

0 Members and 1 Guest are viewing this topic.

Offline Beepy

  • Trade Count: (0)
  • Posts: 3
Newbie..got a ?
« on: November 08, 2006, 09:13:23 AM »
Sooooo   I finallly get to go pick up the new NEF handi Ultra Varmint in .223 today!  Plan on floating the forend tomorrow but won't be able to take her out for a go-round until saturday.  Should I go ahead and polish the chamber up with from Fritz before I even touch off the first round?  How'bout doing a couple of passes down the barrel with some Frtiz to speed up the break-in.  Any thoughts?  Thanks
 ;D
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Newbie..got a ?
« Reply #1 on: November 08, 2006, 09:18:34 AM »
Welcome to GBO! Won't hurt, you need to clean it good anyway, so do it all at the same time. ;) The chamber polish isn't necessary if you have an extractor barrel, but it won't hurt to do it on an ejector barrel.

Tim

 http://www.graybeardoutdoors.com/smf/index.php/topic,67490.0.html
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline myarmor

  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 3239
  • Gender: Male
Re: Newbie..got a ?
« Reply #2 on: November 08, 2006, 11:09:01 AM »
Shoot it first without the O-Ring, and see how it does. Bring it with you and try it both ways. O and congrats.

-Aaron
Logged

Offline Beepy

  • Trade Count: (0)
  • Posts: 3
Re: Newbie..got a ?
« Reply #3 on: November 08, 2006, 03:36:27 PM »
soooooo... ummm   whats and o-ring...

Anyways got her home and cleaned up.  Stole a redfield 3-9x40 from another rifle to stick on her for now.  She looks right at home!  Thanks for the linky
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Newbie..got a ?
« Reply #4 on: November 08, 2006, 03:49:40 PM »
O-rings are explained in the FAQ and Help sticky. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Beepy

  • Trade Count: (0)
  • Posts: 3
Re: Newbie..got a ?
« Reply #5 on: November 08, 2006, 03:50:11 PM »
Oh, finally had some time to read the FAQ's (like you shouldn't do that first right??)  Thanks
Logged

Offline Beepy

  • Trade Count: (0)
  • Posts: 3
Re: Newbie..got a ?
« Reply #6 on: November 08, 2006, 04:39:59 PM »
So I also plan sticking a Harris Bipod on this baby, I have heard that the handi is very picky about forearm pressure.  How does the bipod affect things.  Does the Oring fix, work with a bipod.  Should a full bedding job be in order?  Thanks again!
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Newbie..got a ?
« Reply #7 on: November 08, 2006, 04:42:22 PM »
Most of those that have fully bedded the forend have the best luck with a bipod, but you won't know until you try it, my O-ringed .223 Ultra Varmint shot one of the best groups I've ever shot with a bipod under it.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline myarmor

  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 3239
  • Gender: Male
Re: Newbie..got a ?
« Reply #8 on: November 08, 2006, 06:23:16 PM »
Some shoot great off Bi-Pods, as do some Handi's with the O-Ring. I have found with my limited experiance, the O-ring will work but may depend on the forarm,most wood based forearms seem to work the best with this method as opposed to synthetic.. this worked well for me....It takes a little getting use too, but once you do it works well...
image hosting by [url
image hosting by [url




-Aaron
Logged
Pages: [1]   Go Up
« previous next »