« previous next »
Pages: [1]   Go Down

Author Topic: Model 176?  (Read 432 times)

0 Members and 1 Guest are viewing this topic.

Offline staraero

  • Trade Count: (0)
  • Posts: 1
  • Gender: Male
  • Zombie coming right for us
Model 176?
« on: November 22, 2006, 12:24:48 PM »
Just got a 10 gauge model 176. 36 inch full choke barrel. Any idea when they was made? And it has a spacer on the stock wood about 2.5 inch's thick is that factory or was it added later? Its right on 53 inch's long total
Logged
Tactical Zombie hunter

Offline Markus

  • Moderators
  • Moderator
  • Trade Count: (15)
  • Senior Member
  • *****
  • Posts: 1767
  • Gender: Male
Re: Model 176?
« Reply #1 on: November 22, 2006, 01:14:44 PM »
Look at the faq sticky on the CF board. There is a list that shows how the 1st two digits of the serial# conespond to the year made.Post a pic of the stock if you can. I can't picture what your talking about. I have one of these too.
Logged
PROUD REDNECK CONSERVATIVE

I'd much rather be remembered for being a great shot than having the most expensive gun

Offline staraero

  • Trade Count: (0)
  • Posts: 1
  • Gender: Male
  • Zombie coming right for us
Re: Model 176?
« Reply #2 on: November 22, 2006, 01:22:16 PM »
Shows it as 1985. Sorry no camera, but picture a spacer under the but pad I can take the pad off and remove the spacer for a shorter stock.
Logged
Tactical Zombie hunter

Offline Markus

  • Moderators
  • Moderator
  • Trade Count: (15)
  • Senior Member
  • *****
  • Posts: 1767
  • Gender: Male
Re: Model 176?
« Reply #3 on: November 22, 2006, 01:36:44 PM »
What the LOP with the spacer?
Logged
PROUD REDNECK CONSERVATIVE

I'd much rather be remembered for being a great shot than having the most expensive gun

Offline staraero

  • Trade Count: (0)
  • Posts: 1
  • Gender: Male
  • Zombie coming right for us
Re: Model 176?
« Reply #4 on: November 22, 2006, 02:30:03 PM »
14 with 11. 1/4 without. This very well could be the wrong stock, the stock is a little bigger than were it mounts has a little extra sticking out all the way around. Is there a synthetic stock available for it? Or a factory replacement stock?
Logged
Tactical Zombie hunter

Offline Markus

  • Moderators
  • Moderator
  • Trade Count: (15)
  • Senior Member
  • *****
  • Posts: 1767
  • Gender: Male
Re: Model 176?
« Reply #5 on: November 23, 2006, 03:54:44 PM »
I've never taken the stock off of my 176 but I'm pretty sure they should bolt right up. You could get one from the factory or choate or gunstocks inc .
Logged
PROUD REDNECK CONSERVATIVE

I'd much rather be remembered for being a great shot than having the most expensive gun
Pages: [1]   Go Up
« previous next »