Author Topic: SKS fix  (Read 726 times)

0 Members and 3 Guests are viewing this topic.

Offline Smokin Joe

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 1230
SKS fix
« on: December 09, 2006, 03:30:24 PM »
Ben, over at Murray's Gunsmithing has a real good parts kit to fix the SKS firing pin slam-fire problem:

http://www.murraysguns.com/sksown.htm
Deo duce, ferro comitante
With God as my leader and my sword as my companion

Offline R.W.Dale

  • Trade Count: (22)
  • Senior Member
  • *****
  • Posts: 2170
Re: SKS fix
« Reply #1 on: December 09, 2006, 05:21:17 PM »
Ben, over at Murray's Gunsmithing has a real good parts kit to fix the SKS firing pin slam-fire problem:

http://www.murraysguns.com/sksown.htm

 If you clean the firing pin channel THOURGHLY and use proper primers you'll never have a problem.

Offline TrenchMud

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 105
Re: SKS fix
« Reply #2 on: December 11, 2006, 04:38:47 AM »
I have never had a problem either ? I'll bet I just Jinxed myself saying that ! Watch it go full auto on me
next time I shoot it. :o

Offline darrell8937

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 471
Re: SKS fix
« Reply #3 on: December 11, 2006, 04:22:35 PM »
The early Russian SKS's have a spring opposing the firing spring, This feature just simply disapered in later models. There are companys that will turn down your firing pin and install a spring. this is great if you use commercial ammo. But not really required. If you firing pin does not rattle in the bolt, you might have a problem. It should move under it's own mass. ( gravity). In the worl of unmodifed SKS'S .. Remove all the Cosmo,(difficult but possible) Use hard primer Ammo. And get to know your weapon. Shoot it a lot. And record the results. Kepp track of what works good in you gun. No two are the same.