« previous next »
Pages: [1]   Go Down

Author Topic: Quick, .35 Remington Handi question  (Read 716 times)

0 Members and 1 Guest are viewing this topic.

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Quick, .35 Remington Handi question
« on: December 27, 2006, 03:53:27 PM »
Hello Quick, I would appreciate your insight into the matter of rechambering a .357 Max Handi to .35 Remington. Do you see any problems with using a .357 Max to turn into a .35 Remington? Is there enough length left in the chamber area after reaming a .357 Mag to a .357 Max or could it be close?...Thanks....<><.... :)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Quick, .35 Remington Handi question
« Reply #1 on: December 27, 2006, 03:59:17 PM »
Not a problem! The 35 Rem is bigger all around.  ;)

Tim



Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Quick, .35 Remington Handi question
« Reply #2 on: December 27, 2006, 04:02:11 PM »
Thanks Quick, I know you have heard this many times but, "You da man!!!"....<><.... ;D
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Quick, .35 Remington Handi question
« Reply #3 on: December 27, 2006, 04:11:11 PM »
Aw shucks,  thanks!
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26945
  • Gender: Male
Re: Quick, .35 Remington Handi question
« Reply #4 on: December 27, 2006, 04:41:09 PM »
I think you're making a LOT of assumptions about the quality of the original work performed. Looks to me like the 1.605" dimension of the Max will carry well out into the neck of the .35 Rem chamber. Out there your looking at .379" vs. .387". Not a lot of room for the person doing the rechamber to have messed up and got a wee bit off center and you to still have room to clean it up.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Quick, .35 Remington Handi question
« Reply #5 on: December 27, 2006, 04:48:54 PM »
The key is to have someone that knows what they're doing do the work. Wayne York did mine and it works perfect. ;) If he had a less than perfect chamber to work with, I'm sure he would have let me know.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline John020769

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 124
  • Gender: Male
Re: Quick, .35 Remington Handi question
« Reply #6 on: December 28, 2006, 12:15:48 PM »
I also have been thinking about the 35 remington but also a 358 Win. can the it be made out of the 357 barrel or should it be done with one of the longer barrels for 358 Win. ?.......................John
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Quick, .35 Remington Handi question
« Reply #7 on: December 28, 2006, 01:31:39 PM »
The .358 Win could be made from a 357 barrel, 22" would be just fine and would only require a rechamber, but a .358 anything in a longer barrel would require a rebore which runs cost up from $50-$100 for a rechamber to well over $300 for the rechamber and rebore. Of just get a .35 Whelen, it's already in production and available as an accessory barrel. It's also been available in a 26" barreled version in the RMEF Ultra made in 1996, they come up for sale every once in a while and some of us lucky sumnaguns got em!! ;D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Quick, .35 Remington Handi question
« Reply #8 on: December 28, 2006, 02:27:53 PM »
I hate to say this, and I do feel blessed,  but I'm one of those "lucky sumnaguns" that got one of those 26" .35 Whelen barrels!!!
You got to love those 26" barrels, of course I really like my 19" barrelled .280 Handi also. Lik2hunt just got one of my 26" .280 barrels from me so I guess he is a "lucky sumnagun" now also!!!....<><.... ;D
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Quick, .35 Remington Handi question
« Reply #9 on: December 28, 2006, 02:30:26 PM »
Yeahbut, it ain't a 26" whelen!!!!  ;D

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline kennyd

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 528
Re: Quick, .35 Remington Handi question
« Reply #10 on: December 29, 2006, 01:22:20 AM »
What about the .357 slower twist?  I would assume that you would want the 200 gr. or heavier bullets in a larger case.  Consider the .356 Winchester?  It is a rimmed .358 if I remember.  This is a consideration for those of us who want a larger fast bullet.
Logged
just because you're paranoid doesn't mean they are not watching you

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Quick, .35 Remington Handi question
« Reply #11 on: December 29, 2006, 05:20:45 AM »
The 1:18¾" 357 twist shoots 250gr bullets just fine. I've shot 240gr Mt Baldys and Paul5388 has shoots 250gr BTBs in his. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »