« previous next »
Pages: [1]   Go Down

Author Topic: I've come to the Dark Side :)  (Read 657 times)

0 Members and 2 Guests are viewing this topic.

Offline Gdbyrd

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 244
I've come to the Dark Side :)
« on: January 04, 2007, 04:08:27 PM »
I've owned a contender in .223 for years, love it.  Today, I made the jump :)  I purchased a stainless 15" Encore in 460 S&W.  I had to order it as I live in the middle of nowhere..so it'll be awhile..But man am I psyched! 

I picked up a box of 454, 460, and two of the 45LC...I can't wait!

Any recommendations before I drop the hammer a few times?

In the line of scopes what would you recommend?  Mounts?

Oh!!!  I can't wait!
Logged

Offline handirifle

  • GBO Supporter
  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 3570
    • http://www.handirifle.com
Re: I've come to the Dark Side :)
« Reply #1 on: January 04, 2007, 05:54:35 PM »
Quote from: Gdbyrd on January 04, 2007, 04:08:27 PM

Any recommendations before I drop the hammer a few times?

Wear gloves and PRAY!

In the line of scopes what would you recommend?

Cast iron

Mounts?

Very Strong!

Oh!!!  I can't wait! ;D

Seriously, congrats, that will be a handful.


Logged
God, Family, and guns, in that order!

Offline Gdbyrd

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 244
Re: I've come to the Dark Side :)
« Reply #2 on: January 04, 2007, 06:37:20 PM »
Lol, thanks
Logged

Offline jlbeebe

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 102
Re: I've come to the Dark Side :)
« Reply #3 on: January 04, 2007, 11:15:53 PM »
This is the very set-up I plan on getting this year. With the exeption of a bullberry barrel. I think I will go with a burris 2-7x32. I hope to hear a range report when you get yours shooting. Congrats on a fine handgun.
Logged

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: I've come to the Dark Side :)
« Reply #4 on: January 05, 2007, 12:52:41 AM »
Quote from: Gdbyrd on January 04, 2007, 04:08:27 PM
I've owned a contender in .223 for years, love it.  Today, I made the jump :)  I purchased a stainless 15" Encore in 460 S&W.  I had to order it as I live in the middle of nowhere..so it'll be awhile..But man am I psyched! 

I picked up a box of 454, 460, and two of the 45LC...I can't wait!

Any recommendations before I drop the hammer a few times?

In the line of scopes what would you recommend?  Mounts?

Oh!!!  I can't wait!


Recoil is not that bad in my opinion, but shooting gloves help. Scope mounts and rings I use Warne all steel and no quick release rings. My scope is a Bushnell Trophy 2 X 6 X 32 and has over 2000 rounds down the tube and not one problem.
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline Lives2hunt

  • Trade Count: (6)
  • Avid Poster
  • **
  • Posts: 129
Re: I've come to the Dark Side :)
« Reply #5 on: January 05, 2007, 02:23:13 AM »
Take off those sunglasses & follow the light!  Congratulations on your purchase and welcome to the board. Lots of good folks here & some great advice whenever you ask for it. ;D
Logged
Will hunt for food.

Offline Gdbyrd

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 244
Re: I've come to the Dark Side :)
« Reply #6 on: January 05, 2007, 09:58:06 AM »
I so badly wanted to buy the frame and get a Bullberry barrel over stock, but for now money is tight-ish, so I decided to wait. 

Thank you all for the warm welcome. 

One of the first things I was looking into was getting a new Forend/Grip.  I plan to do a lot of plinking as well as some longer range play, so I wanted to get a forend that has a wide base that's flat..but my attempted searches online have come up empty.  I'm contemplating doing my own forend..My old man has gotten pretty good at working with wood, like to see if we could come up with something, BUT in the event that fails, any links to a site with some decently priced forends like I'm wanting?

Also, in between shooting the shorter chamberings, when going to the 460 I need to aggresively clean out the chamber right?  Someone on another forum said I could not use lead cased bullets, and to stay with only jacketed stuff when playing...any thoughts on that?

PS, I love this site..I spent a few days reading all the way back to Dec '05 before I made my purchase.  My next barrel is going to be for .308, then more than likely a 45-70.
Logged

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Re: I've come to the Dark Side :)
« Reply #7 on: January 05, 2007, 10:14:55 AM »
All I shoot is hard cast gas checked bullets in my 460 Mag. Not a probem at all.
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline longwinters

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3070
Re: I've come to the Dark Side :)
« Reply #8 on: January 05, 2007, 12:05:14 PM »
Anybody know of any sites that have grips and forends, custom or semi custom? 

Long
Logged
Life is short......eternity is long.
Pages: [1]   Go Up
« previous next »