« previous next »
Pages: [1]   Go Down

Author Topic: Bullet Alloy  (Read 609 times)

0 Members and 1 Guest are viewing this topic.

Offline Turk

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 187
Bullet Alloy
« on: January 27, 2007, 04:10:23 AM »
What is your preferred bullet alloy for casting.

Mine is generally Lyman #2 Tin 5/Antimony 5/Lead 90, Brinell 15 either purchased or mixed from WW/Tin or WW/Lino/Tin.  With the magnum pressures I sometimes use a mix of Tin 2/Antimony 7/Lead 91, Brinell 18.  For rifle I use either Linotype or oven heat treated WW.

Thanks,

Turk
Logged
In God I trust all others bring data.
If you know you're going to a gunfight take a rifle.
Life Member 1/50th Infantry Association (Vietnam)
Member of the 173rd Airborne Association
Life member NRA & ORPA

Offline Lead pot

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 743
  • Gender: Male
Re: Bullet Alloy
« Reply #1 on: January 27, 2007, 07:09:30 AM »
Depends on what your using the bullet for.
Hand gun, modern HP rifle. Buffalo gun.
Smokeless powder or black powder.

Kurt
Logged
Dont go were the path leads,go were there is no path and leave a trail.

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18263
Re: Bullet Alloy
« Reply #2 on: January 28, 2007, 12:29:16 AM »
lead pot hit it. It all depends on what your doing with the bullet. Ive probablyi got 6-10 differnt alloys in the barn at any one time. Ive got pure, range lead, ww, lynotype, and tin mixed in many differnt combinations. Your #2 is a good all around alloy for about anything though
Logged
blue lives matter

Offline Castaway

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1105
  • Gender: Male
Re: Bullet Alloy
« Reply #3 on: January 28, 2007, 01:57:33 AM »
For general plinkiing, quenched wheelweights (WW).  For hunting with my 45 Colt carbine, 1/2 lead, 1/2 WW.  For the pistol in 45 Colt, straight WW.  Paper patched bullets call for virtually pure lead.  Mine are rougly 1:40.
Logged

Offline ron haralson

  • Trade Count: (0)
  • Member
  • *
  • Posts: 70
Re: Bullet Alloy
« Reply #4 on: January 28, 2007, 11:45:32 AM »
I use two - either ww +2% tin air cooled for medium hard, water dropped for hard - or 20 : 1 lead and tin for soft alloy. It seems to me there aren't many applications that can't be covered by these two.
Logged
Pages: [1]   Go Up
« previous next »