« previous next »
Pages: [1]   Go Down

Author Topic: receiver sights for Yugo M48  (Read 1009 times)

0 Members and 1 Guest are viewing this topic.

Offline rio grande

  • Trade Count: (39)
  • Senior Member
  • *****
  • Posts: 1205
receiver sights for Yugo M48
« on: January 28, 2007, 06:48:09 PM »
Anybody know a GOOD 'smith who can drill and tap a Mauser for a receiver sight?  I'm thinking about a commercial Mauser peep sight on the bridge or a conventional Williams or Redfield target peep.  I had a so-called "gunsmith" drill and tap the side of an SKS once so I could solidly mount a scope base. He botched the job, one hole went in crooked and he wallowed it out trying to fix it. Sad. Ruined the rifle.  I need someone who can put the sight on square and right.
I guess I could send the barrelled receiver anywhere in the country. 
Anybody else have any ideas?  Unconventional, maybe? Modifications of other rifles sights, like M1 carbine or Enfield #4?  Those #4 peeps are GREAT. I'm not wanting a Mojo sight, as I MAY want to put a scope up there on the original sight base in future. Remember, Col. Jeff Cooper said a scope is not necessary to a scout rifle, but good peeps (esp. ghost rings) are. 
Logged

Offline beemanbeme

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2587
Re: receiver sights for Yugo M48
« Reply #1 on: January 29, 2007, 11:37:49 AM »
The gunsmith could have tig welded the hole shut and started over. Or gone to larger screws.

I'm gonna guess that the job you're suggesting could be done at home with a hand drill and the proper sized drill and tap.  However, to answer you question, I would imagine just about any smith could do the job for you so you shouldn't have to ship the rifle anywhere.  Where are you located?
Logged

Offline rio grande

  • Trade Count: (39)
  • Senior Member
  • *****
  • Posts: 1205
Re: receiver sights for Yugo M48
« Reply #2 on: January 29, 2007, 04:04:43 PM »
I'm in Houston, Texas - I'd be hesitant to try any gunsmith unless I knew his work was firstclass.
Logged

Offline speedwayrobert

  • Trade Count: (0)
  • Member
  • *
  • Posts: 9
Re: receiver sights for Yugo M48
« Reply #3 on: January 30, 2007, 03:29:23 AM »
There should be more first class gunsmiths in your area than in most, considering how many scoped hunting rifles there are in TX.  Gander Mt.  has stores all around and probably in your area too.  They do general gunsmithing work on site and do it pretty compentently.
Logged

Offline Roudy

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 206
Re: receiver sights for Yugo M48
« Reply #4 on: January 30, 2007, 05:36:53 AM »
Rio,
You might go to your favorite gun shop and ask them if they would recommend a local gunsmith.  Might even ask at several gunshops.  They will probably have a reliable smith in mind.

Roudy

PS:  Last year I had a Williams reciever sight put on an Ishapor Enfield....one of my better moves. 
Logged

Offline Will Bison

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 591
Re: receiver sights for Yugo M48
« Reply #5 on: January 31, 2007, 11:23:34 AM »
???????
Logged
Pages: [1]   Go Up
« previous next »