« previous next »
Pages: [1]   Go Down

Author Topic: 45LC Carbine  (Read 872 times)

0 Members and 1 Guest are viewing this topic.

Offline Curt Dawson

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 154
45LC Carbine
« on: January 31, 2007, 08:37:05 AM »
Any user reportsonthe new NEF 45 long colt carbine?Especially using heavy bullet loads normally listed for either the rugers or contenders.Also could it be safely reamed out for either the 454 or 460 s&w?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 45LC Carbine
« Reply #1 on: January 31, 2007, 08:43:34 AM »
They aren't in production yet, won't be available until the end of next month by H&R's guesstimate, accessory barrels to follow later this year.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline 270Handiman

  • GBO Supporter
  • Trade Count: (3)
  • Avid Poster
  • *****
  • Posts: 189
  • Gender: Male
Re: 45LC Carbine
« Reply #2 on: January 31, 2007, 09:57:47 AM »
Quote
They aren't in production yet, won't be available until the end of next month by H&R's guesstimate, accessory barrels to follow later this year.

Tim

Eagerly awaiting "later this year"!
Logged

Offline gould

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 167
Re: 45LC Carbine
« Reply #3 on: January 31, 2007, 10:10:40 AM »
I don't think it will last long as a 460 S&W maybe not even the 454 lots of presure there. But the 500 S&W is right up there also. If it dose work let me know also I would like a 460 in a Handi.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 45LC Carbine
« Reply #4 on: January 31, 2007, 10:42:43 AM »
One member is having a .308 Winchester barrel rebored and rechambered to Casull as we type, so at least  Wayne York thinks it will work fine at 50kcup, or he wouldn't do it, but the .460 runs 5kpsi higher than the .500 at 65kpsi, so it may be too much, no one here has done either yet.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Curt Dawson

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 154
Re: 45LC Carbine
« Reply #5 on: February 02, 2007, 06:16:59 PM »
Ok,what do we know about hot 45LC  loads in the handi?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 45LC Carbine
« Reply #6 on: February 02, 2007, 06:29:55 PM »
No offense, but "hot 45 Colt loads" is somewhat of an oxymoron!! With a SAAMI MAP of just 25kcup, it's not a concern on an SB2 frame that's factory available in .500S&W with a SAAMI MAP of 60kpsi. ;)

Tim

http://www.frfrogspad.com/miscellk.htm#pressure


Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline JShirley

  • Trade Count: (0)
  • Member
  • *
  • Posts: 5
    • John's Page
Re: 45LC Carbine
« Reply #7 on: February 02, 2007, 09:52:19 PM »
Wonder if 260 grain @ 1200 fps (from revolver) load is pushing it?  GA Arms has a new HP at this level listed, at reasonable prices.

John
Logged

Offline Badnews Bob

  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 2963
  • Gender: Male
Re: 45LC Carbine
« Reply #8 on: February 03, 2007, 04:12:20 AM »
You should be able to load this thing with the hottest Ruger loads  I kinda doubt you,ll ever hurt a handie with .45 colt loads unless your being stupid to begin with. All sane loads should be safe in the handie. 8)
Logged
Badnews Bob
AE-2 USN retired
Pages: [1]   Go Up
« previous next »