« previous next »
Pages: [1]   Go Down

Author Topic: 30-06 Rimmed  (Read 1089 times)

0 Members and 1 Guest are viewing this topic.

Offline zooly

  • Trade Count: (0)
  • Member
  • *
  • Posts: 9
30-06 Rimmed
« on: January 15, 2007, 04:49:11 PM »
Does anyone import brass for the 30-06 R?  It may be called the 7.62x62R.  I'm comming at this from the back side.  In my search for a small .416 cartridge for cast paper patched bullets, I came across a gunsmith that listed a reamer for the ".416 X 30-06R". A lot like the .400 Whelen, but with a rim to headspace on.  So at one time 30-06R must have be available.

Thanks

zooly
Logged

Offline Smokin Joe

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 1230
Re: 30-06 Rimmed
« Reply #1 on: January 16, 2007, 04:56:31 PM »
Not that I know of, but you can probably use the 400/350 Rigby. It has the same base dimension and is 2.75" long

http://www.buffaloarms.com/browse.cfm/4,240.htm
Logged
Deo duce, ferro comitante
With God as my leader and my sword as my companion

Offline no guns here

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1671
  • Gender: Male
Re: 30-06 Rimmed
« Reply #2 on: January 30, 2007, 05:00:19 AM »
If you are interested, I will look around here in Germany for some rimmed brass for the .30-'06.

ngh
Logged
"I feared for my life!"

Offline Sir Charles deMoutonBlack

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 323
Re: 30-06 Rimmed
« Reply #3 on: February 04, 2007, 12:05:31 PM »
 in my COTW, 3d ed. the closest I can find is the 8 x 65R for a basic case that can be altered.  I have tried .444 Marlin for 8 x 57R, but it wrinkles when choking it down to 7 x 57R.

BTW, I've never heard of a rimmed .30 '06.  Is this a project?  I think there are several wildcats based on the .444 case.
Logged
Pages: [1]   Go Up
« previous next »