« previous next »
Pages: [1]   Go Down

Author Topic: dan wesson 360 load  (Read 1076 times)

0 Members and 1 Guest are viewing this topic.

Offline vstrom

  • Trade Count: (0)
  • Posts: 4
dan wesson 360 load
« on: April 29, 2003, 03:38:28 PM »
Anyone Know a safe starting load for the dan wesson 360 cal. 10" special silhouette barrel. I can find no loads heavier than 180 gr.. i have a good supply of 200 grain lead head, and speer 200 gr fmc silh. bullets. I am going to use H-110, and Vita vori n-110 powders, Just need  a starting load that would be safe for the 200 yard rams? Thanks in advance.vstrom
Logged
steve bowling

Offline wheelgun7360

  • Trade Count: (3)
  • Member
  • *
  • Posts: 41
360 loads
« Reply #1 on: April 29, 2003, 04:36:10 PM »
:D  i shoot an eight inch 7360 with sierra 180 grain with 17.5 grains h-110.velocity is 1350fps and it is very accurate. i would try the same loads with the 200 grainers with h-110. i don't know much about the vv powder. never used it but i hear it is excellent.wheelgun7360
Logged
allen44mag

Offline vstrom

  • Trade Count: (0)
  • Posts: 4
dw360 starting load
« Reply #2 on: April 30, 2003, 03:23:06 PM »
Thanks I will take the  load under advisement. vstrom.
Logged
steve bowling

Offline # 566

  • Trade Count: (3)
  • Member
  • *
  • Posts: 46
dan wesson 360 load
« Reply #3 on: May 02, 2003, 08:54:04 AM »
I used 200 cast in a D/W, Seville,& T/C in 357 MAX, the load was 17.5 gn  SR 4759, 100% loading density. It's a pain to measure but works very well with cast bullets.

WayneS
Logged

Offline El Hombre

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 109
  • Gender: Male
Load Data
« Reply #4 on: May 28, 2003, 10:31:01 AM »
Hello,
The Dan Wesson website lists handloading data for the 360 as well as their other calibers. Go to www.danwessonfirearms.com then click on "Ammo and Brass", then on "360".

I believe the data they give was for a 10" barrel.

Shoot Safe!

El Hombre
Logged
Pages: [1]   Go Up
« previous next »