« previous next »
Pages: [1]   Go Down

Author Topic: 32 win spec load  (Read 511 times)

0 Members and 2 Guests are viewing this topic.

Offline millwright

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 160
  • Gender: Male
32 win spec load
« on: February 01, 2007, 01:20:29 PM »
I am looking for a load using a beartooth 170 gr lfngc for a 32 win spec.  Thanks
Logged
The worst time to find your tongue is when you lose your head.

Offline dubber123

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 435
Re: 32 win spec load
« Reply #1 on: February 01, 2007, 02:30:00 PM »
I have 4 using IMR powders from Loaddata.com.  They are however with a 165 gr. cast, and are max loads.  I do think they can be used to get you started, ( reduce a little to start).  They are:  IMR 4198  30.0 grs.  2,250fps.,  IMR 4895  32.0 grs.  2,200 fps.,  IMR 3031  33.5 grs.  2,250 fps.,  IMR  4320  36.5 grs.  2,200 fps.  All bullets were sized at .322" .  I hope this helps.
Logged

Offline jtaylor1960

  • Trade Count: (0)
  • Member
  • *
  • Posts: 39
Re: 32 win spec load
« Reply #2 on: February 25, 2007, 02:23:50 PM »
 I my favorite powder in the 32 spl. is H-4895.It works well at reduced charges and also fullpower loads.It is listed in most manuals.Other good powders are IMR-4064,H-335,VARGET,RL-7. In general my 32spl. shoots well with about suitable powder.Anything listed fo th 30/30win. will work well.Good luck.Jeff Taylor
Logged
Pages: [1]   Go Up
« previous next »