« previous next »
Pages: [1]   Go Down

Author Topic: trigger on my handi  (Read 439 times)

0 Members and 1 Guest are viewing this topic.

Offline splitnock

  • Trade Count: (0)
  • Member
  • *
  • Posts: 19
trigger on my handi
« on: February 27, 2007, 09:40:00 AM »
I just bought a handi in .243 and was shooting it the other day and noticed the trigger is quite stiff, will this lighten up after time or is there something I could do to make it smoother/lighter. thanks split
Logged

Offline Hazard

  • Trade Count: (0)
  • Member
  • *
  • Posts: 84
Re: trigger on my handi
« Reply #1 on: February 27, 2007, 09:43:54 AM »
check the FAQs section, there should be something in there that explains it in some good detail.

good luck

adam
Logged

Offline PartsMan

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1351
  • Gender: Male
  • Proud Handi Owner
    • myspace
Re: trigger on my handi
« Reply #2 on: February 27, 2007, 11:08:53 AM »
A good cleaning will help a little but the trigger job works wonders.
Logged

Offline myarmor

  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 3239
  • Gender: Male
Re: trigger on my handi
« Reply #3 on: February 28, 2007, 04:10:22 AM »
Welcome to GBO split.
Both mentioned good points, and in the FAQs you will find a detailed explanation with good pics to help you if you do decide to do a trigger job yourself. And if you find yourself stuck, hop back on here and ask questions, we can help guide you through if you need it.


-Aaron
Logged

Offline busmanjoe

  • Trade Count: (0)
  • Posts: 1
Re: trigger on my handi
« Reply #4 on: February 28, 2007, 08:44:02 AM »
The graffite method posted here worked great on mine  brought it to about 3 pounds with 1 hours work
Logged
Pages: [1]   Go Up
« previous next »