Author Topic: trail boss.. 45/70  (Read 966 times)

0 Members and 1 Guest are viewing this topic.

Offline txpete

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 195
  • Gender: Male
trail boss.. 45/70
« on: March 28, 2007, 05:08:09 AM »
I have a bunch of 340 gr pb bullets I want to use for plinking in the ruger # 1.anyone use trail boss yet in 45/70.
it has been pretty good so far in my 45 colt loads.
thanks
pete

Offline muskeg13

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 208
Re: trail boss.. 45/70
« Reply #1 on: March 28, 2007, 09:43:04 PM »
So far I've tried 3 45-70 loads with Trail Boss. 
1.  Plain base 330gr (Gould) hollow points and 325gr RCBS FPs with 0.030 fiber wads, Javelina Alox lube and 16.5 gr of Trail Boss, WLR in Winchester cases:  accuracy was nothing to write home about.  2 to 3 inches at 50 yds. 

2.  413gr RCBS FP gas check , Javelina Alox lube, with 13.0 gr of Trail Boss.  1" @50 yards

All loads were mild with no visible signs of pressure and light recoil.  No leading and a bright shiny bore again after running a dry patch.  I didn't use the chronograph as the air temperatures were below freezing (~+25F).   Bullets were sized to .458

I also tried a load in my 1895 .405 Winchester: 16.5 gr Trail Boss, RCBS 358gr GC FP in Hornady cases and shot 1.5-2" groups at 50yds

Offline txpete

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 195
  • Gender: Male
Re: trail boss.. 45/70
« Reply #2 on: March 29, 2007, 10:21:57 AM »
thank you for the info.I am a big fan of AA5744 but I am going to try the TB in my #1 ruger.
thanks again
pete